Most common failures | No# failures |
---|
Headlamp aim out of alignment | 60 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 29 |
Stop lamp remains on when the brakes are released | 24 |
Registration plate issues | 19 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Stop lamp not working |4.3.1 |a| |ii|| | 13 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 13 |
Stop lamp remains on when the brake is released |1.3.1e| | 12 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 11 |
Stop lamp not working (4.3.1 (a) (ii)) | 11 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 10 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 10 |
Rear reflector on motorcycle missing |1.4.1| | 9 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 9 |
Front Brake excessively binding (1.2.1 (f)) | 8 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 8 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 8 |
Rear reflector on motorcycle obscured |1.4.2b| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 7 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 7 |
Front Position lamp not working (4.2.1 (a)) | 6 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 5 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 5 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 5 |
Front Brake excessively binding |1.2.1 |f|| | 5 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 5 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 5 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 5 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 4 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 4 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 4 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Headlamp insecure (4.1.1 (c)) | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Front Brake disc|s| excessively worn |3.2.A1l| | 4 |
Rear reflector missing (4.8.2 (a) (ii)) | 4 |
Rear Brake excessively binding |1.2.1 |f|| | 4 |
Rear reflector on motorcycle obscured |1.4.1| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Offside Indicator tell tale not functioning |1.5.2| | 3 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 3 |
Riders seat insecure (6.2.5 (a) (ii)) | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Nearside Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Front position lamp missing |1.1.1a| | 2 |
Fuel cap ineffective |6.1.3 |b| |i|| | 2 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 2 |
Riders seat with a defective supporting structure (6.2.5 (a) (i)) | 2 |
Nearside Rear Road spring fractured (5.3.1 (b) (i)) | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Nearside Indicator tell tale not functioning |1.5.2| | 2 |
Nearside Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Offside Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 2 |
Rear Brake drum in such a condition that it is seriously weakened (1.1.14 (a) (ii)) | 2 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
Nearside Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 2 |
Offside Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 2 |
Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Indicator tell tale not functioning |1.5.2| | 2 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Front Front position lamp damaged and function impaired |1.1.1b| | 2 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear Brake lever pivot has excessive free play |1.1.1 |b|| | 2 |
Dipswitch does not operate immediately when selected on main beam |4.1.3 |b|| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |