Most common failures | No# failures |
---|
Headlamp aim out of alignment | 6 |
Registration plate lamp issues | 5 |
Registration plate issues | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 5 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Front Brake excessively binding |1.2.1 |f|| | 3 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Horn not working |1.7.3a| | 2 |
Nearside Front Position lamp not working (4.2.1 (a)) | 2 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Stop lamp likely to become detached (4.3.1 (c) (ii)) | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Offside Front Position lamp not working (4.2.1 (a)) | 1 |
Horn not working (7.7 (a)) | 1 |
Rear Brake lining|s| less than 1.0 mm thick |1.1.13 |a|| | 1 |
Front Brake lining|s| less than 1.0 mm thick |1.1.13 |a|| | 1 |
Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 1 |
Offside Throttle operating incorrectly |6.2.1f| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Front position lamp damaged and function impaired |1.1.1b| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Wheel spindle loose |5.2.1 |c| |i|| | 1 |
Riders seat with a defective supporting structure broken (6.2.5 (a) (i)) | 1 |
Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front Shock absorber has a serious fluid leak FRONT FORK SEALS U/S (5.3.2 (b)) | 1 |
Fuel cap ineffective door not closing / locking (6.1.3 (b) (i)) | 1 |
Front Brake lever has restricted free movement |1.1.15 |e|| | 1 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Clutch lever bent so it cannot be readily operated (6.2.7 (b)) | 1 |
Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Brake drum significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Nearside Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Front Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Offside Front Brake lever is so short that the brake cannot be readily applied (1.1.2 (d)) | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Nearside Rear Shock absorber likely to become detached (5.3.2 (a) (ii)) | 1 |
Offside Rear Shock absorber likely to become detached (5.3.2 (a) (ii)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Floor brake test indicates a sticking brake (3.3.C2c) | 1 |
Front Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies control |1.3.1a| | 1 |
Front Brake grabbing severely (1.2.1 (c)) | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |