>

MOT History from tests of petrol HONDA NTV650s year 1994

Review the list of common HONDA NTV650 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:81.01%
(The average a petrol HONDA NTV650 year 1994 passes without issue)
Based on:1,501 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment55
Front Roller brake test indicates a binding brake |3.3.A1a|15
Nearside Front shock absorber seal failed and leaking oil |2.3.3|15
Throttle operating incorrectly |6.2.1f|15
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|14
Offside Front shock absorber seal failed and leaking oil |2.3.3|11
Registration plate issues11
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|11
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|11
Front shock absorber seal failed and leaking oil |2.3.3|9
Exhaust is leaking and excessively noisey |7.1.1b|8
Headlamp aim beam image kick up to the offside |1.6|8
Steering movement excessively `notchy` with the wheel raised |2.2.1b|7
Stop lamp does not illuminate immediately a brake applies |1.3.1a|7
Steering headbearing has excessive free play |2.2.2|7
Front position lamp does not illuminate immediately when switched on |1.1.3a|7
Front wheel bearings have excessive free play |2.3.5b|7
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|6
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|6
Headlamp insecure |1.2.3b|5
Offside Front Direction indicator not working |1.5.1c|4
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||4
Handlebar deformed |2.1.1b|4
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|4
Front Front wheel bearings have excessive free play |2.3.5b|4
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|4
Rear shock absorber has inadequate damping effect. |2.4.A.3b|4
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|3
Offside Front Direction indicators not working |1.5.1c|3
Front wheel bearings are excessively rough |2.3.5b|3
Nearside Rear Direction indicators not working |1.5.1c|3
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Exhaust excessively deteriorated |7.1.1a|3
Rear reflector on motorcycle missing |1.4.1|3
Front Floor brake test indicates a binding brake |3.3.C2c|3
Rear Roller brake test indicates a binding brake |3.3.A1a|3
Front Front wheel bearings are excessively rough |2.3.5b|3
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|3
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|3
Nearside Front Direction indicator not working |1.5.1c|3
Offside Front Footrest insecure |6.2.1a|3
Front Stop lamp not working (4.3.1 (a) (ii))3
Front Throttle operating incorrectly |6.2.1f|2
Rear Brake disc|s| excessively scored |3.2.A1l|2
Rear Floor brake test indicates a sticking brake |3.3.C2c|2
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Front Front shock absorber seal failed and leaking oil |2.3.3|2
Front Direction indicator not working |1.5.1c|2
Horn not working |1.7.3a|2
Nearside Front Direction indicator insecure |1.5.3b|2
Rear wheel bearings have excessive free play |2.4.A.2c|2
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Direction indicators flashing less than 60 times a minute |1.5.1c|2
Front Brake excessively binding |1.2.1 |f||2
Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii||2
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c|2
Front Stop lamp remains on when the brake is released |1.3.1e|2
Nearside Front Footrest insecure |6.2.1a|2
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c|2
Rear Stop lamp remains on when the brake is released |1.3.1e|2
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|2
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c|2
Front Brake lever has inadequate reserve travel |3.1.3b|2
Front Brake disc|s| cracked |3.2.A1g|2
Rear Brake disc|s| excessively worn |3.2.A1l|2
Offside Footrest insecure |6.2.1a|2
Indicator tell tale not functioning |1.5.2|2
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Rear Stop lamp does not emit a steady light |1.3.1b|2
Brake hose damaged2
Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|2
Front suspension has inadequate damping effect. |2.3.6c|2
Front Brake excessively binding (1.2.1 (f))2
Front Position lamp not working (4.2.1 (a))2
Front Wheel bearing rough when rotated (5.1.3 (b) (i))2
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e|1
Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Front Brake lever cannot be applied smoothly |3.1.3d|1
Offside Front Brake lever excessively damaged |3.2.A1c|1
Nearside Front Direction indicator incorrect colour |1.5.1b|1
Front Fairings so located that it is likely to impede the steering |2.1.2e|1
Rear Direction indicator not working |1.5.1c|1
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Nearside Front Steering lock stop ineffective |2.1.3|1
Front Front position lamp flickers when tapped lightly by hand |1.1.3c|1
Offside Front Direction indicator insecure |1.5.3b|1
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Offside Rear Rear suspension bush has excessive free play |2.4.A2a|i||1
Stop lamp does not illuminate immediately a brake applies Suspect stop lamp permanently on |1.3.1a|1
Brake excessively binding |1.2.1 |f||1
Direction indicator flashing more than 120 times per minute |1.5.1c|1
Rear position lamp damaged and function impaired |1.1.1b|1
Front Brake disc|s| has excessive run out |3.2.A1m|1
Rear Brake disc|s| cracked |3.2.A1g|1
Front Upper An item not tested |Manual|1
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Position lamp switch insecure |1.1.4b|1
Nearside Steering lock stop ineffective |2.1.3|1
Front Brake fluid not visible |1.1.10 |d| |iii||1
Exhaust has a major leak of exhaust gases |6.1.2 |a||1
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii||1
Brake lever is so short that the brake cannot be readily applied |1.1.2 |d||1
Offside Rear Footrest missing |6.2.12 |a||1
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i||1
Rear Stop lamp missing |1.3.3a|1
Front Handlebar deformed |2.1.1b|1
Offside Front Steering lock stop maladjusted |2.1.3|1
Position lamp showing white light to the rear |4.2.3 |a| |ii||1
Front Brake disc|s| excessively worn |3.2.A1l|1
Steering control handlebar movement restricted by trapped cables clutch cable |2.1.2c|1
Exhaust mounting missing |7.1.1c|1
Front All position lamps do not illuminate immediately when switched on |1.1.3a|1
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Nearside Front Direction indicators not working |1.5.1c|1
Front Headlamp switch faulty |1.2.4|1
Stop lamp remains on when the brake is released |1.3.1e|1
Centre Front Front position lamp insecure |1.1.1c|1
Centre Front Headlamp aim beam image kick up to the offside |1.6|1
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1|1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Front Handlebar handgrip not secure to handlebars. |2.1.1c|1
Rear Roller brake test indicates a severely juddering brake |3.3.A1b|1
Offside Front Throttle operating incorrectly |6.2.1f|1
Front suspension assembly component loose |2.3.1|1
Nearside Rear Direction indicator insecure |1.5.3b|1
Nearside Rear Direction indicator damaged and function impaired |1.5.3a|1
Nearside Front Footrest missing |6.2.1a|1
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c|1
Rear Stop lamp affected by the operation of another lamp |1.3.2|1
Stop lamp not working off front leaver |4.3.1 |a| |ii||1
Front Wheel bearing rough when rotated |5.1.3 |b| |i||1
Nearside Rear Footrest missing |6.2.1a|1
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Riders seat insecure |6.2.1a|1
Offside Rear Footrest insecure |6.2.1a|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Front Brake disc|s| excessively pitted |3.2.A1l|1
Rear Brake disc|s| excessively pitted |3.2.A1l|1
Floor brake test indicates a sticking brake |3.3.C2c|1
Rear Brake lining|s| less than 1.0 mm thick |1.1.13 |a||1
Nearside Front Steering lock stop maladjusted |2.1.3|1
Headlamp missing |1.2.3a|1
Nearside Front Direction indicator missing |1.5.1a|1
Offside Front Direction indicator missing |1.5.1a|1
An item not tested |Manual|1
Outer Front Brake pedal cannot be released smoothly |3.1.3d|1
Nearside Shock absorber has a serious fluid leak |5.3.2 |b||1
Front Steering lock stop ineffective |2.1.3|1
Front Headlamp aim beam image kick-up is to the offside |1.6.1|1
Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Front position lamp insecure |1.1.1c|1
Clutch lever bent so it cannot be readily operated. |6.2.1g|1
Front Wheel damaged significantly reducing the original strength |4.2.1a|1
Nearside Front Handlebar deformed |2.1.1b|1
Nearside Front Steering control handlebar movement restricted by trapped cables |2.1.2c|1
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j|1
Offside Front Throttle operating incorrectly throttle doesn`t self close as designed |6.2.1f|1
Offside Front Handlebar handgrip not secure to handlebars. throttle grip rotates on throttle tube |2.1.1c|1
Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Front Front suspension has inadequate damping effect. |2.3.6c|1
Front Exhaust is leaking and excessively noisey |7.1.1b|1
Front Exhaust mounting missing |7.1.1c|1
Offside Rear Footrest missing |6.2.1a|1
Central Rear Stop lamp not working |4.3.1 |a| |ii||1
Front Brake master cylinder fluid level dangerously low |3.2.B1d|1
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Rear reflector on motorcycle missing |1.4.1|1
Offside Steering lock stop ineffective |2.1.3|1
Centre Front Steering headbearing has excessive free play |2.2.2|1
Offside Front suspension assembly component excessively corroded. |2.3.1|1
Nearside Front suspension assembly component excessively corroded. |2.3.1|1
Centre Front Front wheel bearings have excessive free play |2.3.5b|1
Nearside Front Front wheel bearings have excessive free play |2.3.5b|1
Offside Front Front wheel bearings have excessive free play |2.3.5b|1
Nearside Front suspension assembly component cracked |2.3.1|1
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j|1
Front Valve stem seriously damaged (5.2.3 (j))1
Throttle operating incorrectly sticking half way on return (6.2.7 (a) (i))1
Front Wheel bearing has excessive play (5.1.3 (a) (i))1
Headlamp not working on main beam (4.1.1 (a) (ii))1
Rear Brake caliper inadequately mounted and braking performance affected rubbing on brake disc (1.1.16 (c) (ii))1
Rear reflector missing (4.8.2 (a) (ii))1
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))1
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Offside Rear All direction indicators not working (4.4.1 (a) (ii))1
Rear Brake excessively binding (1.2.1 (f))1
Stop lamp not working (4.3.1 (a) (ii))1
Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii))1
Front Roller brake test indicates a binding brake (3.3.A1a)1
Steering operation restricted in free movement from lock to lock (2.1.4 (c))1
Rear Brake master cylinder insecure Feed hose clip corroded (1.1.10 (c))1
Nearside Rear Footrest insecure (6.2.12 (a))1
Horn not working (7.7 (a))1
Front Brake hose damaged and likely to fail (1.1.12 (a))1
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Rear Rear reflector missing (4.8.2 (a) (ii))1
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy