>

MOT History from tests of petrol HONDA NTV600Ms year 1992

Review the list of common HONDA NTV600M failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:77.19%
(The average a petrol HONDA NTV600M year 1992 passes without issue)
Based on:732 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment27
Offside Front shock absorber seal failed and leaking oil |2.3.3|10
Front wheel bearings have excessive free play |2.3.5b|9
Throttle operating incorrectly |6.2.1f|9
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|9
Front wheel bearings are excessively rough |2.3.5b|8
Nearside Front shock absorber seal failed and leaking oil |2.3.3|6
Steering movement excessively `notchy` with the wheel raised |2.2.1b|6
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|6
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|6
Stop lamp does not illuminate immediately a brake applies |1.3.1a|5
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|5
Registration plate issues5
Front Roller brake test indicates a binding brake |3.3.A1a|5
Rear shock absorber has inadequate damping effect. |2.4.A.3b|5
Exhaust is leaking and excessively noisey |7.1.1b|5
Front Brake disc|s| excessively worn |3.2.A1l|4
Front shock absorber seal failed and leaking oil |2.3.3|3
Horn not working |1.7.3a|3
Steering headbearing has excessive free play |2.2.2|3
Rear Roller brake test indicates a sticking brake |3.3.A1a|3
Rear Brake disc|s| cracked |3.2.A1g|3
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Front Steering headbearing has excessive free play |2.2.2|3
Front Front wheel bearings have excessive free play |2.3.5b|3
Offside Front Footrest insecure |6.2.1a|3
Direction indicators not working |1.5.1c|2
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|2
Front Floor brake test indicates a sticking brake |3.3.C2c|2
Motorcycle structure excessively damaged |6.1.1a|2
Rear Stop lamp remains on when the brake is released |1.3.1e|2
Rear Roller brake test indicates a binding brake |3.3.A1a|2
Front Throttle operating incorrectly |6.2.1f|2
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|2
Headlamp aim beam image kick up to the offside |1.6|2
Steering movement excessively stiff with the wheel raised |2.2.1b|2
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|2
An item not tested |Manual|2
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|2
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Rear Floor brake test indicates a binding brake |3.3.C2c|2
Rear suspension bush has excessive free play |2.4.A2a|i||2
Handlebar handgrip not secure to handlebars. |2.1.1c|2
Exhaust excessively deteriorated |7.1.1a|2
Headlamp not working on dipped beam (4.1.1 (a) (ii))2
Nearside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Front Roller brake test indicates a severely juddering brake |3.3.A1b|1
Front suspension has inadequate damping effect. |2.3.6c|1
Horn not working replaced horn unit |1.7.3a|1
Rear Direction indicator incorrect colour |1.5.1b|1
Outer Front Lower Front wheel bearings are excessively rough |2.3.5b|1
Outer Front Upper Roller brake test indicates a sticking brake |3.3.A1a|1
Front Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Front Brake excessively binding |1.2.1 |f||1
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Exhaust excessively deteriorated |7.1.1a|1
Nearside Front Upper Handlebar handgrip not secure to handlebars. |2.1.1c|1
Horn sounds harsh or grating |1.7.3c|1
Riders seat insecure |6.2.1a|1
Position lamp switch insecure |1.1.4b|1
Front Roller brake test indicates a sticking brake |3.3.A1a|1
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Stop lamp missing |1.3.3a|1
Nearside Front Direction indicators not working |1.5.1c|1
Offside Front Direction indicators not working |1.5.1c|1
Nearside Rear Direction indicators not working |1.5.1c|1
Offside Rear Direction indicators not working |1.5.1c|1
Front Direction indicator insecure |1.5.3b|1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Front Headlamp aim beam image kick-up is to the offside |1.6.1|1
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c|1
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c|1
Brake pedal cannot be released smoothly |3.1.3d|1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Nearside Rear Footrest insecure |6.2.1a|1
Roller brake test indicates a sticking brake |3.3.A1a|1
Rear Brake hose leaking brake caliper |1.1.12 |c||1
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Sidecar front position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Sidecar rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Rear reflector on sidecar missing |1.4.1|1
Nearside Rear Footrest missing |6.2.1a|1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Headlamp insecure |1.2.3b|1
Front Brake disc|s| excessively scored |3.2.A1l|1
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Fuel pipe leaking |7.2.1a|1
Front Exhaust has a major leak of exhaust gases |6.1.2 |a||1
Front Brake hose leaking |1.1.12 |c||1
Rear Brake disc fractured |1.1.14 |a| |ii||1
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a|1
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Headlamp switch insecure |1.2.4|1
Direction indicators flashing more than 120 times per minute |1.5.1c|1
Offside Steering lock stop ineffective |2.1.3|1
Rear Brake disc|s| excessively worn |3.2.A1l|1
Offside Rear Footrest insecure |6.2.1a|1
Roller brake test indicates a binding brake |3.3.A1a|1
Front Floor brake test indicates a binding brake |3.3.C2c|1
Fuel system component leaking |7.2.1a|1
Rear position lamp obscured more than 50% |1.1.1d|1
Footrest insecure |6.2.1a|1
Handlebar mounting clamp bolt loose |2.1.1a|1
Offside Front Direction indicator not working |1.5.1c|1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Nearside Rear suspension bush has excessive free play |2.4.A2a|i||1
Offside Rear suspension bush has excessive free play |2.4.A2a|i||1
Front position lamp incorrect colour |1.1.2a|1
Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Brake pedal is bent and the brake cannot be readily applied |3.1.3c|1
Rear Brake disc|s| is excessively distorted |3.2.A1m|1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Nearside Footrest insecure |6.2.1a|1
Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Front Brake lagging in operation |1.2.1 |d||1
Steering headbearing has excessive wear or free play |2.2.2 |f| |i||1
Front Brake lever has inadequate reserve travel |3.1.3b|1
Nearside Front Direction indicator insecure |1.5.3b|1
Central Rear Direction indicator likely to become detached (4.4.1 (c) (ii))1
Front Shock absorber has a serious fluid leak both (5.3.2 (b))1
Steering operation restricted in free movement from lock to lock cables (2.1.4 (c))1
Front Brake excessively binding (1.2.1 (f))1
Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii))1
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii))1
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Central Rear Valve stem seriously damaged cracked and split (5.2.3 (j))1
Horn not working (7.7 (a) (ii))1
All position lamps not working (4.2.1 (a))1
Stop lamp not working both controls (4.3.1 (a) (ii))1
All direction indicators not working (4.4.1 (a) (ii))1
Central Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c))1
Headlamp not working on main beam (4.1.1 (a) (ii))1
Front Position lamp not working (4.2.1 (a))1
Headlamp aim not tested (4.1.2 (b))1
Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b))1
Rear Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))1
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy