Most common failures | No# failures |
---|
Headlamp aim out of alignment | 30 |
Throttle operating incorrectly |6.2.1f| | 10 |
Registration plate issues | 7 |
Front wheel bearings have excessive free play |2.3.5b| | 6 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Front wheel bearings are excessively rough |2.3.5b| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Stop lamp remains on when the brakes are released | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Front Front wheel bearings are excessively rough |2.3.5b| | 3 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Exhaust excessively deteriorated |7.1.1a| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Headlamp insecure |1.2.3b| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Nearside Footrest insecure |6.2.1a| | 2 |
Rear parking brake recording little or no effort | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Brake hose damaged | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Rear Valve stem seriously misaligned |5.2.3 |j|| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Nearside Rear Position lamp not working |4.2.1 |a| |ii|| | 1 |
Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Nearside Parking brake inoperative on one side |1.4.1 |a|| | 1 |
Offside Parking brake inoperative on one side |1.4.1 |a|| | 1 |
Steering wheel has movement relative to the column indicating looseness |2.2.1 |a| |i|| | 1 |
Front Shock absorbers has a serious fluid leak |5.3.2 |b|| | 1 |
Driver`s seat insecure |6.2.5 |a| |ii|| | 1 |
Hazard warning switch inoperative |4.4.2 |a| |ii|| | 1 |
Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Front shock absorber leaking oil |9.2.7b| | 1 |
Front brake disc contaminated by oil |3.5.1h| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Centre Rear Lower Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Lower Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Brake performance not tested |3.3| | 1 |
Front An item not tested |Manual| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Front Direction indicator insecure |1.5.3b| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Stop lamp does not emit a steady light foot brake |1.3.1b| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Offside Front suspension assembly component excessively bent |2.3.1| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Lower Brake reaction bracket insecure |3.2.A1j| | 1 |
Centre Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Brake hose excessively twisted |3.2.B3a| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Brake pedal is inoperative |3.1.3c| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Brake hose excessively deteriorated | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Centre Front Upper Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Front Lower Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Offside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Lower Footrest insecure |6.2.1a| | 1 |
Offside Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Front Upper Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Brake pedal mounting insecure |3.1.2a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Front Brake hose leaking fluid |3.2.B4| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Wheel excessively damaged badly dented (5.2.2 (c) (i)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) | 1 |
Handlebar insecure (2.2.1 (d) (i)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Fuel tank insecure (6.1.3 (a) (i)) | 1 |
Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
Offside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |