Most common failures | No# failures |
---|
Headlamp aim out of alignment | 40 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Front wheel bearings have excessive free play |2.3.5b| | 14 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 14 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Throttle operating incorrectly |6.2.1f| | 11 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 11 |
Registration plate issues | 9 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 9 |
Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
Front wheel bearings are excessively rough |2.3.5b| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Offside Front Footrest insecure |6.2.1a| | 6 |
Steering headbearing has excessive free play |2.2.2| | 6 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Nearside Rear Direction indicator insecure |1.5.3b| | 4 |
Offside Rear Direction indicators not working |1.5.1c| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Front Hydraulic brake control feels spongy |3.1.4a| | 3 |
Brake pipe excessively corroded | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Nearside Front Direction indicators not working |1.5.1c| | 3 |
Front suspension has inadequate damping effect. |2.3.6c| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Front Brake disc|s| cracked |3.2.A1g| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Offside Handlebar deformed |2.1.1b| | 2 |
Offside Footrest insecure |6.2.1a| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Service brake: efficiency below requirements |3.7.C.1a| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Rear Brake disc|s| cracked |3.2.A1g| | 2 |
Brake hose excessively deteriorated | 2 |
Front Valve stem seriously damaged |5.2.3 |j|| | 2 |
Rear brake binding | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Upper Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Direction indicators flashing more than 120 times per minute r/h |1.5.1c| | 1 |
Front Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Sidecar wheel bearings have excessive free play |5.2.3c| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Front Handlebar deformed |2.1.1b| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Nearside Rear Brake cylinder severely corroded |3.2.B1b| | 1 |
Nearside Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Nearside Handlebar deformed |2.1.1b| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Centre Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Rear Footrest insecure |6.2.12 |a|| | 1 |
Fuel cap ineffective |6.1.3 |b| |i|| | 1 |
Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Offside Front Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Brake pedal functionally incomplete |3.3.A.1a| | 1 |
rear brake recording little or no effort |3.7.B.5a| | 1 |
Steering control restriction of the free movement of the steering |9.2.2a| | 1 |
Rear IMPORTANT. Do not use failure or PRS against this item. For other suspension defects please enter 5190 in the `Find item` box above. |9.2| | 1 |
IMPORTANT. Do not use failure or PRS against this item. For other suspension defects please enter 5190 in the `Find item` box above. |9.2| | 1 |
Axle swivel joint has excessive play |2.5.A.3b| | 1 |
Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Brake linkage has abnormal movement of levers indicating maladjustment |3.5.1f| | 1 |
Centre Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Steering pivot point has excessive play |2.2.B.1g| | 1 |
Mechanical brake component has restricted free movement | 1 |
Front Headlamp switch faulty |1.2.4| | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Centre Rear Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Inner Rear Upper Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Centre Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Offside Front suspension assembly component cracked |9.2.5c| | 1 |
Steering headbearing has excessive free play |9.2.4| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Centre Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Rear Brake pedal has excessive side movement indicating a badly worn bearing or pivot |3.3.A.1d| | 1 |
Rear Trikes, quads or pre-68 vehicles, service brake efficiency below requirements |3.7.C.1a| | 1 |
Centre Brake pipe inadequately clipped |3.6.B.1| | 1 |
Centre front brake binding |3.7.B.1| | 1 |
Headlamp aim not tested |1.8.A.1c| | 1 |
Brake hose damaged | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear Brake pipe excessively damaged |3.2.B2a| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Stop lamp does not illuminate immediately a brake applies front stop switch does not function |1.3.1a| | 1 |
Footrest missing |6.2.1a| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Offside Rear Rear reflector on motorcycle insecure |1.4.2c| | 1 |
An item not tested |Manual| | 1 |
Nearside Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front wheel bearings are excessively tight |2.3.5b| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Front Fuel hose leaking |7.2.1a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Upper Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Horn not working |1.7.3a| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Nearside Front Suspension arm attachment bracket/mounting likely to become detached |5.3.3 |a| |ii|| | 1 |
Suspension arm likely to become detached both rear arm front bolts not locked |5.3.3 |a| |ii|| | 1 |
Suspension arm likely to become detached all rear arms |5.3.3 |a| |ii|| | 1 |
Stop lamp|s| missing both rear |4.3.1 |a| |ii|| | 1 |
Hazard warning lamps not fitted |4.4.1 |d|| | 1 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Nearside Rear reflector more than 50% obscured |1.5.1b| | 1 |
Offside Rear reflector more than 50% obscured |1.5.1b| | 1 |
Offside Rear position lamp|s| insecure |1.1.A.3a| | 1 |
Offside Front Position lamp switch insecure |1.1.A.1| | 1 |
Front Fluid suspension unit totally deflated |2.4.D.1a| | 1 |
Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
All direction indicators adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Roller brake test brake efficiency less than 27.5% overall |1.2.2 |a| |ii|| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake caliper insecure Securing bolt missing! |1.1.16 |c| |i|| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies adjustment required to rear brake control |1.3.1a| | 1 |
Front Wheel bearing rough when rotated both (5.1.3 (b) (i)) | 1 |
Offside Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Headlamp aim not tested (4.1.2 (b)) | 1 |
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake caliper insecurely mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Rear Brake caliper inadequately mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |