Most common failures | No# failures |
---|
Headlamp aim out of alignment | 193 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 84 |
Steering headbearing has excessive free play |2.2.2| | 75 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 74 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 64 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 63 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 53 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 52 |
Exhaust is leaking and excessively noisey |7.1.1b| | 47 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 46 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 45 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 45 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 45 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 41 |
Front wheel bearings have excessive free play |2.3.5b| | 33 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 28 |
Front shock absorber seal failed and leaking oil |2.3.3| | 27 |
Headlamp aim beam image kick up to the offside |1.6| | 25 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 24 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 23 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 23 |
Registration plate issues | 22 |
Throttle operating incorrectly |6.2.1f| | 22 |
Exhaust excessively deteriorated |7.1.1a| | 21 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 21 |
Front wheel bearings are excessively rough |2.3.5b| | 20 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 19 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 19 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 18 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 17 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 17 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 17 |
Front Steering headbearing has excessive free play |2.2.2| | 17 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 17 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 15 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 15 |
Horn not working |1.7.3a| | 14 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 13 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 13 |
Front Front wheel bearings have excessive free play |2.3.5b| | 13 |
Stop lamp remains on when the brakes are released | 13 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 13 |
Rear Brake disc|s| cracked |3.2.A1g| | 11 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 11 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 11 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 10 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 9 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 9 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 9 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 9 |
Handlebar deformed |2.1.1b| | 9 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 9 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 8 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 8 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 8 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 8 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 8 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 7 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 7 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
Stop lamp remains on when the brake is released |1.3.1e| | 7 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 7 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 6 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 6 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 6 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 6 |
Front Front wheel bearings are excessively rough |2.3.5b| | 6 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 6 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 6 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 6 |
Front Brake excessively binding (1.2.1 (f)) | 6 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 6 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 5 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 5 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 5 |
Front Brake excessively binding |1.2.1 |f|| | 5 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 5 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 5 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 5 |