| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 11 |
| Registration plate lamp issues | 6 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 4 |
| Front Brake excessively binding (1.2.1 (f)) | 4 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
| Headlamp switch faulty |1.2.4| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Brake performance not tested (1.2.1 (g)) | 2 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Front Wheel excessively distorted |5.2.2 |c| |i|| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Roller brake test indicates a binding brake front brakes |3.3.A1a| | 1 |
| Front Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
| Horn not working |1.7.3a| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Rear Floor brake test indicates a sticking brake pedal siezed |3.3.C2c| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies switch |1.3.1a| | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Brake disc|s| has excessive run out front discs |3.2.A1m| | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Rear Brake disc fractured |1.1.14 |a| |ii|| | 1 |
| Central Rear Upper Rear reflector missing Stick on Reflective strip fitted - reflector fitted in accordance. (4.8.2 (a) (ii)) | 1 |
| Rear brake disc in such a condition that it is seriously weakened | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a)) | 1 |
| Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Brake disc fractured cracked across full width of disc (1.1.14 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Offside Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Offside Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Front Brake disc fractured (1.1.14 (a) (ii)) | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Suspension attachment bracket/mounting insecure axel pinch bolt (5.3.3 (a) (i)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Central Front Steering operation restricted in free movement from lock to lock head races notchey (2.1.4 (c)) | 1 |
| Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |