>

MOT History from tests of petrol HONDA NSR125s year 2001

Review the list of common HONDA NSR125 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:60.10%
(The average a petrol HONDA NSR125 year 2001 passes without issue)
Based on:1,812 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment102
Rear reflector on motorcycle missing |1.4.1|100
Drive chain excessively loose |6.2.1d|69
Offside Front shock absorber seal failed and leaking oil |2.3.3|36
Registration plate issues35
Nearside Front shock absorber seal failed and leaking oil |2.3.3|35
Steering movement excessively `notchy` with the wheel raised |2.2.1b|34
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|33
Rear wheel bearings have excessive free play |2.4.A.2c|32
Drive chain worn to excess |6.2.1e|31
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||29
Steering headbearing has excessive free play |2.2.2|28
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|25
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|23
Nearside Rear Footrest missing |6.2.1a|21
Rear Drive chain sprocket worn to excess |6.2.1e|21
Offside Rear Footrest missing |6.2.1a|19
Stop lamp does not illuminate immediately a brake applies |1.3.1a|19
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|19
Rear Rear reflector on motorcycle missing |1.4.1|17
Throttle operating incorrectly |6.2.1f|16
Front shock absorber seal failed and leaking oil |2.3.3|16
Horn not working |1.7.3a|15
Front Roller brake test indicates a binding brake |3.3.A1a|15
Wheel alignment incorrect which adversely affects the handling |2.5.1|14
Nearside Front Direction indicator not working |1.5.1c|14
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|13
Fuel system component insecure |7.2.1b|13
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|13
Exhaust is leaking and excessively noisey |7.1.1b|12
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|12
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||12
Rear Rear wheel bearings have excessive free play |2.4.A.2c|12
Drive chain excessively tight |6.2.1d|11
Nearside Rear Direction indicator not working |1.5.1c|11
Rear Footrest missing |6.2.1a|11
Front Brake disc|s| excessively worn |3.2.A1l|10
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||10
Rear Drive chain excessively loose |6.2.1d|10
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|9
Rear suspension bearing has excessive free play |2.4.A2a|i||8
Headlamp switch faulty |1.2.4|8
Offside Front Direction indicator not working |1.5.1c|8
Steering movement excessively stiff with the wheel raised |2.2.1b|8
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|7
Rear position lamp insecure |1.1.1c|7
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|7
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|7
Offside Steering lock stop ineffective |2.1.3|7
Rear suspension bush has excessive free play |2.4.A2a|i||7
Rear Direction indicator not working |1.5.1c|7
Nearside Rear Direction indicators not working |1.5.1c|7
Front Direction indicators not working |1.5.1c|7
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|6
Direction indicator not working |1.5.1c|6
Fairings insecure and likely to impede the steering |2.1.2e|6
Front position lamp does not illuminate immediately when switched on |1.1.3a|6
Front Front shock absorber seal failed and leaking oil |2.3.3|6
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|6
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|6
Direction indicators flashing more than 120 times per minute |1.5.1c|6
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|6
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|6
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|6
Headlamp insecure |1.2.3b|6
Direction indicators not working |1.5.1c|6
Front Drive chain sprocket worn to excess |6.2.1e|6
Stop lamp remains on when the brake is released |1.3.1e|6
Drive chain excessively loose (6.1.7 (c) (i))6
Offside Rear Direction indicator not working |1.5.1c|5
Rear suspension movement is excessively stiff |2.4.A.3b|5
Offside Front Direction indicator damaged and function impaired |1.5.3a|5
Front wheel bearings have excessive free play |2.3.5b|5
Offside Rear Direction indicators not working |1.5.1c|5
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c|5
Exhaust mounting missing |7.1.1c|5
Offside Direction indicator not working |1.5.1c|5
Offside Front Direction indicator missing |1.5.1a|5
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|5
Front Steering headbearing has excessive free play |2.2.2|5
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||5
Rear reflector missing |4.8.2 |a| |ii||5
Brake lever cannot be applied smoothly |3.1.3d|5
Offside Front Direction indicators not working |1.5.1c|5
Nearside Rear Drive chain excessively loose |6.2.1d|5
Headlamp aim headlamp deteriorated and function impaired |1.2.3a|5
Rear shock absorber has inadequate damping effect. |2.4.A.3b|5
Front Brake lever cannot be applied smoothly |3.1.3d|5
Rear reflector missing (4.8.2 (a) (ii))5
Rear Brake disc|s| excessively worn |3.2.A1l|4
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|4
Rear Drive chain excessively tight |6.2.1d|4
Headlamp aim not tested |1.6|4
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c|4
Nearside Direction indicator not working |1.5.1c|4
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|4
Nearside Rear Direction indicator incorrect colour |1.5.1b|4
Offside Front Direction indicator insecure |1.5.3b|4
Offside Handlebar deformed |2.1.1b|4
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||4
Stop lamp affected by the operation of another lamp |1.3.2|4
Offside Front Footrest insecure |6.2.1a|4
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|4
An item not tested |Manual|4
Fuel system component leaking |7.2.1a|4
Riders seat insecure |6.2.1a|4
Drive chain sprocket carrier worn to excess |6.2.1e|4
Rear Drive chain worn to excess |6.2.1e|4
Exhaust mounting does not fully support the exhaust system |7.1.1.c|4
Front Direction indicator not working |1.5.1c|4
Rear Direction indicators not working |1.5.1c|4
Wheel alignment incorrect which adversely affects the steering |2.5.1|4
Front Brake lever has inadequate reserve travel |3.1.3b|4
Rear mono-shock pivot excessively worn |2.4.B.4|4
Front Stop lamp remains on when the brake is released |1.3.1e|4
Nearside Front Direction indicators not working |1.5.1c|3
Rear Stop lamp remains on when the brake is released |1.3.1e|3
Brake pedal has inadequate reserve travel |3.1.3b|3
Front Floor brake test indicates a sticking brake |3.3.C2c|3
Indicator tell tale not functioning |1.5.2|3
Fuel pipe leaking |7.2.1a|3
Direction indicators flashing less than 60 times a minute |1.5.1c|3
Offside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|3
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|3
Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|3
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|3
Headlamp incorrect colour |1.2.1|3
Rear Drive chain sprocket carrier worn to excess |6.2.1e|3
Front position lamp incorrect colour |1.1.2a|3
Front wheel bearings are excessively rough |2.3.5b|3
Rear Roller brake test indicates a binding brake |3.3.A1a|3
Nearside Front Direction indicator missing |1.5.1a|3
Nearside Rear Direction indicator insecure |1.5.3b|3
Front Brake caliper|s| insecure |3.2.A1j|3
Front position lamp damaged and function impaired |1.1.1b|3
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|3
Exhaust markings indicating not for road use or similar wording |7.1.4|3
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|3
Rear Rear suspension bush has excessive free play |2.4.A2a|i||3
Rear mono-shock pivot seized |2.4.B.4|3
Headlamp not working on dipped beam (4.1.1 (a) (ii))3
Offside Rear Footrest missing (6.2.12 (a))3
Throttle operating incorrectly (6.2.7 (a) (i))3
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))3

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy