Most common failures | No# failures |
---|
Headlamp aim out of alignment | 14 |
Rear reflector on motorcycle missing |1.4.1| | 10 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Registration plate issues | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Horn not working |1.7.3a| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Offside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Seat insecure |6.2.1a| | 1 |
Nearside Rear Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Rear Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Direction indicators not working |1.5.1c| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Rear Upper Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Nearside Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Handlebar grip missing (2.2.1 (d) (i)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Throttle operating incorrectly sticking (6.2.7 (a) (i)) | 1 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |