Most common failures | No# failures |
---|
Headlamp aim out of alignment | 18 |
Rear reflector on motorcycle missing |1.4.1| | 9 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 8 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Drive chain excessively loose |6.2.1d| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Registration plate issues | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Horn not working |1.7.3a| | 3 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Front Motorcycle structure excessively distorted |6.1.1a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear reflector on motorcycle obscured |1.4.1| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Nearside Front Direction indicator insecure |1.5.3b| | 2 |
Front Front mudguard insecure |2.3.7| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Seat insecure |6.2.1a| | 1 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Front Front position lamp missing |1.1.1a| | 1 |
Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Brake lever attachment screws loose |3.1.2b| | 1 |
Front Brake hose stretched by steering movement |3.2.B3b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Front Upper Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Rear position lamp obscured more than 50% |1.1.1d| | 1 |
Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Front Headlamp switch insecure |1.2.4| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Offside Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Front position lamp damaged and function impaired |1.1.1b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
An item not tested |Manual| | 1 |
Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Brake hose excessively deteriorated | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Gradient brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.D1b| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Position lamp switch insecure |1.1.4b| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Offside Front Brake lever insecure |3.1.2a| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Front suspension assembly has an insecure fork brace |2.3.4d| | 1 |
Front Indicator tell tale not functioning |1.5.2| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Roller brake test indicates a binding brake rear break sticking on |3.3.A1a| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Rear suspension component seized |2.4A2a|ii|| | 1 |
Front Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Rear Drive chain sprocket so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Headlamp aim not tested head light bulb incorrectly fitted (4.1.2 (b)) | 1 |
Horn not working (7.7 (a)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |