| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 56 |
| Rear reflector on motorcycle missing |1.4.1| | 53 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 30 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 21 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 19 |
| Drive chain excessively loose |6.2.1d| | 19 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 18 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 18 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
| Steering headbearing has excessive free play |2.2.2| | 15 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 14 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 13 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 13 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 12 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 12 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 11 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 11 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 11 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 10 |
| Registration plate issues | 10 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 9 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 8 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 8 |
| Throttle operating incorrectly |6.2.1f| | 8 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 8 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 8 |
| Direction indicators not working |1.5.1c| | 7 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 7 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
| Front wheel bearings have excessive free play |2.3.5b| | 7 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 7 |
| Horn not working |1.7.3a| | 7 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 7 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 7 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 6 |
| Front wheel bearings are excessively rough |2.3.5b| | 6 |
| Front suspension has inadequate damping effect. |2.3.6c| | 6 |
| Rear Footrest missing |6.2.1a| | 6 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 6 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 6 |
| Drive chain excessively tight |6.2.1d| | 6 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 6 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 5 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 5 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 5 |
| Nearside Rear Direction indicator not working |1.5.1c| | 5 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 5 |
| Chain guard insecure |6.2.1c| | 5 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 5 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 4 |
| Drive chain worn to excess |6.2.1e| | 4 |
| Nearside Front Direction indicator not working |1.5.1c| | 4 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 4 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 4 |
| Handlebar deformed |2.1.1b| | 4 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 4 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 4 |
| Front Steering headbearing has excessive free play |2.2.2| | 4 |
| An item not tested |Manual| | 4 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 4 |
| Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 4 |
| Headlamp main beam affected by the operation of the horn |1.2.2c| | 4 |
| Nearside Rear Footrest missing |6.2.1a| | 4 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 4 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 4 |
| Brake lever cannot be applied smoothly |3.1.3d| | 3 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 3 |
| Fairing so located that it is likely to impede the steering |2.1.2e| | 3 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
| Rear mono-shock pivot seized |2.4.B.4| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Plate brake test No brake control achieves an efficiency of 30%. |3.3.B2a| | 3 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Seat insecure |6.2.1a| | 3 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 3 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 3 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
| Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Front mudguard insecure |2.3.7| | 3 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 3 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 3 |
| Front Brake hose leaking fluid |3.2.B4| | 3 |
| Rear Drive chain worn to excess |6.2.1e| | 3 |
| Offside Front Direction indicator not working |1.5.1c| | 3 |
| Offside Rear Footrest missing |6.2.1a| | 3 |
| Nearside Front Direction indicator insecure |1.5.3b| | 3 |
| Offside Rear Direction indicator not working |1.5.1c| | 3 |
| Fuel system component insecure |7.2.1b| | 3 |
| Riders seat insecure |6.2.1a| | 3 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 3 |
| Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Offside Footrest insecure |6.2.1a| | 2 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Rear suspension component seized |2.4A2a|ii|| | 2 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 2 |
| Offside Front Footrest insecure |6.2.1a| | 2 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Front suspension assembly component loose |2.3.1| | 2 |
| Nearside Rear Direction indicators not working |1.5.1c| | 2 |
| Offside Front Direction indicator insecure |1.5.3b| | 2 |
| Rear shock absorber insecurely mounted |2.4.A.3b| | 2 |
| Nearside Front Direction indicators not working |1.5.1c| | 2 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Front position lamp missing |1.1.1a| | 2 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
| Front Direction indicators not working |1.5.1c| | 2 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 2 |
| Offside Rear Direction indicators not working |1.5.1c| | 2 |
| Headlamp switch faulty |1.2.4| | 2 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 2 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
| Rear reflector on motorcycle obscured |1.4.1| | 2 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Headlamp aim not tested |1.6| | 1 |
| Nearside Upper Front suspension assembly component missing |2.3.1| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Rear Brake linkage excessively damaged |3.2.A1c| | 1 |
| Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Upper Rear mono-shock insecure |2.4.B.4| | 1 |
| Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Front suspension assembly has an insecure fork brace |2.3.4d| | 1 |
| Offside Front suspension assembly has an insecure fork brace |2.3.4d| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Plate brake test Neither brake control achieves an efficiency of 25% |3.3.B2b| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Stop lamp does not illuminate immediately a brake applies front control |1.3.1a| | 1 |
| Stop lamp remains on when the brake is released rear control |1.3.1e| | 1 |
| Offside Front Direction indicator obscured |1.5.1a| | 1 |
| Nearside Front Direction indicator obscured |1.5.1a| | 1 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Nearside Rear Direction indicator obscured |1.5.1a| | 1 |
| Offside Rear Direction indicator obscured |1.5.1a| | 1 |
| Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Centre Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Motorcycle structure cracked |6.1.1a| | 1 |
| Front Brake master cylinder severely damaged |3.2.B1b| | 1 |
| Upper Fork yoke deformed |2.1.1b| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
| Central Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Centre Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Chain guard insecure |6.2.1c| | 1 |
| Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Front Brake pipe union leaking fluid |3.2.B4| | 1 |
| Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
| Rear Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Rear reflector on sidecar missing |1.4.1| | 1 |
| Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear Chain guard insecure |6.2.1c| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Rear wheel insecure |4.2.3b| | 1 |
| Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Nearside Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Offside Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Upper Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Front position lamp adversely affected by the operation of another lamp Indicator making sidelight flash |1.1.3b| | 1 |
| Rear position lamp adversely affected by the operation of another lamp Tailight flashing with indicators |1.1.3b| | 1 |
| Steering lock stop ineffective R/h lock innefective and handlebar fouling fuel tank |2.1.3| | 1 |
| Headlamp at least one does not illuminate on main beam Dipped beam inoperative |1.2.2a|ii|| | 1 |
| Headlamp at least one does not illuminate on main beam High beam inoperative |1.2.2a|ii|| | 1 |
| Rear shock absorber has inadequate damping effect. Inadequate damping rebounding to quickly |2.4.A.3b| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Front position lamp incorrect colour |1.1.2a| | 1 |
| Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Offside Rear Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Front Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
| Front suspension spring worn and seriously weakened both |2.3.2b| | 1 |
| Brake pedal cannot be released smoothly return spring missing |3.1.3d| | 1 |
| Front Brake locking device insecure |3.2.A1e| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Rear Plate brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.B1c| | 1 |
| Rear Plate brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.B1c| | 1 |
| Front Plate brake test indicates a severely juddering brake |3.3.B1b| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Decelerometer brake test the less effective brake control does not achieve an efficiency of 25%. |3.3.E1b| | 1 |
| Nearside Handlebar deformed |2.1.1b| | 1 |
| Offside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Front suspension assembly component missing |2.3.1| | 1 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
| Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Brake hose excessively deteriorated | 1 |
| Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Chain guard fouling another component |6.2.1c| | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Front Footrest insecure |6.2.1a| | 1 |
| Offside Direction indicator insecure |1.5.3b| | 1 |
| Position lamp switch insecure |1.1.4b| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear Brake locking device missing split pin missing |3.2.A1e| | 1 |
| Front Upper Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Upper Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear Upper Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 1 |
| Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Centre Rear Lower Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Centre Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Brake disc|s| insecure |3.2.A1g| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Steering lock stop ineffective |2.1.3| | 1 |
| Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Offside Front Front suspension assembly component missing |2.3.1| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Rear Footrest insecure |6.2.1a| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Rear Brake pedal is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Brake pedal is inoperative |3.1.3c| | 1 |
| Front Brake pedal is inoperative |3.1.3c| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Rear Brake lever excessively damaged |3.2.A1c| | 1 |
| Upper Brake lever attachment screws loose |3.1.2b| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Front suspension assembly has an insecure fork brace |2.3.4d| | 1 |
| Footrest missing rear foot pegs |6.2.1a| | 1 |
| Rear suspension component loose bult missing |2.4.A.1a| | 1 |
| Central Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Brake lever mounting insecure |3.1.2a| | 1 |
| Rear position lamp damaged and function impaired |1.1.1b| | 1 |
| Headlamp aim beam image kick up to the offside beam image obviously incorrect |1.6| | 1 |
| Front An item not tested |Manual| | 1 |
| Rear An item not tested |Manual| | 1 |
| Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Rear Rear mono-shock pivot seized |2.4.B.4| | 1 |
| Nearside Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Steering lock stop maladjusted both |2.1.3| | 1 |
| Nearside Front Motorcycle structure cracked |6.1.1a| | 1 |
| Nearside Motorcycle structure cracked |6.1.1a| | 1 |
| Nearside Front Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
| Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Brake component has an inadequate repair |3.1.5| | 1 |
| Brake drum|s| securing bolt|s| loose |3.2.A1g| | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Centre Rear suspension has an inadequate repair of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Footrest insecure |6.2.1a| | 1 |
| Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Nearside Rear Direction indicator missing |1.5.1a| | 1 |
| Offside Rear Direction indicator missing |1.5.1a| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Front Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Offside Front Stop lamp does not illuminate immediately a brake applies switch fault |1.3.1a| | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Nearside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Front Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
| Nearside Footrest missing |6.2.1a| | 1 |
| Offside Footrest missing |6.2.1a| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Outer Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride REAR SPROCKET NUTS LOOSE X 4 |6.2.1h| | 1 |
| Front suspension assembly component loose TOP YOKE NUT LOOSE |2.3.1| | 1 |
| Front Brake hose stretched by steering movement |3.2.B3b| | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking engine mount insecure |6.1.1c| | 1 |
| Rear suspension bush has excessive free play lower mono link |2.4.A2a|i|| | 1 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Indicator switch defective |1.5.4| | 1 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Inner Rear Lower Drive chain excessively tight |6.2.1d| | 1 |
| Inner Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Inner Rear Lower Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Inner Front Lower Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Nearside Rear Lower Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Front Upper Brake master cylinder severely damaged |3.2.B1b| | 1 |
| Inner Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Front Upper Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Inner Rear Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
| Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Rear Motorcycle structure cracked |6.1.1a| | 1 |
| Stop lamp affected by the operation of the horn |1.3.2| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Brake hose leaking fluid |3.2.B4| | 1 |
| Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Motorcycle structure excessively distorted |6.1.1a| | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Exhaust system insecure (6.1.2 (a)) | 1 |
| Fuel system component leaking fuel tap (6.1.3 (b) (i)) | 1 |
| Rear Pillion seat insecure bolt missing from seat cowl (6.2.6 (a) (ii)) | 1 |
| Front Motorcycle structure joining/attachment plate or fastening insecure fairing not fastened securely (6.1.1 (b) (i)) | 1 |
| Front Steering linkage locking device ineffective fork /mudgaurd plate not secure (2.1.3 (d)) | 1 |
| Front Forks in such a condition that steering control is adversely affected mudgaurd/fork plate not secure (2.2.2 (d) (ii)) | 1 |
| Offside Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Rear Lower Suspension rod pin or bush excessively worn bottom shock linkage (5.3.4 (a) (i)) | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| Rear Suspension arm pin or bush excessively worn swingarm linkage has worn bushes (5.3.4 (a) (i)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |