Most common failures | No# failures |
---|
Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 8 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Headlamp aim out of alignment | 4 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 4 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Stop lamp remains on when the brakes are released | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 2 |
Horn not working |1.7.3a| | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Brake excessively binding |1.2.1 |f|| | 2 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Rear Brake lever mounting insecure |3.1.2a| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Brake component is excessively corroded front |3.1.5| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Centre Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Rear Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Rear Brake lever mounting insecure |3.1.2a| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Offside Front Brake component damaged and seriously reduced in strength |3.2.A1| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Brake lever pivots excessively worn |3.1.3a| | 1 |
Nearside Rear Brake lever insecure |3.1.2a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Centre Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake lever insecure (1.1.2 (e) (i)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Offside Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Offside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Nearside Front Brake master cylinder insecure (1.1.10 (c)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected grip insecure (6.2.7 (a) (ii)) | 1 |
Rear Brake lever has insufficient reserve travel Needs adjustment (1.1.2 (a)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Brake lever pivot has excessive free play (1.1.1 (b)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |