Most common failures | No# failures |
---|
Headlamp aim out of alignment | 29 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 29 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 21 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 16 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 13 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 13 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 12 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
Steering headbearing has excessive free play |2.2.2| | 11 |
Stop lamp remains on when the brake is released |1.3.1e| | 11 |
Horn not working |1.7.3a| | 11 |
Registration plate issues | 11 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Riders seat insecure |6.2.1a| | 6 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 6 |
Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 5 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Rear Brake lever mounting insecure |3.1.2a| | 4 |
Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
Front suspension has inadequate damping effect. |2.3.6c| | 3 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Front Horn not working |1.7.3a| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Stop lamp remains on when the brakes are released | 3 |
Horn control defective |1.7.2a| | 3 |
Exhaust excessively deteriorated |7.1.1a| | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Front Valve stem seriously damaged (5.2.3 (j)) | 3 |
Direction indicators not working |1.5.1c| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Stop lamp missing |1.3.3a| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Nearside Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front Valve stem seriously damaged Badly perished and cracked |5.2.3 |j|| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Front Brake performance not tested |3.3| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Nearside Brake lever insecure |3.1.2a| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Centre Motorcycle structure excessively distorted stand not secure |6.1.1a| | 1 |
Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Fuel cap missing |7.2.2a| | 1 |
Horn missing |1.7.1| | 1 |
Rear suspension component misaligned |2.4.A.1a| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Brake lining|s| contaminated by oil or grease |3.2.A1k| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front Brake lever mounting insecure |3.1.2a| | 1 |
Front Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Rear wheel has a loose wheel bolt|s| |4.2.3a| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Brake lever mounting insecure |3.1.2a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear suspension component loose retaining bolts missing from o/s suspension arm |2.4.A.1a| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Nearside Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Nearside Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear Brake lever insecure |1.1.2 |e| |i|| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Shock absorber has a serious fluid leak all four |5.3.2 |b|| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Offside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Stop lamp not working brake light switch not working |4.3.1 |a| |ii|| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Brake lever cracked |3.1.2c| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Nearside Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Offside Rear suspension component excessively bent |2.4.A.1a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort no r/brake |3.3.A1c| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Offside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Nearside Front Horn control defective |1.7.2a| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Nearside Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Vehicle identification number not legible |6.3.5a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Indicator switch defective |1.5.4| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Roller brake test indicates a binding brake (3.3.A1a) | 1 |
Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak both (5.3.2 (b)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Handlebar handgrip not secure to handlebars. (2.1.1c) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake component inadequately mounted Banjo bolt washers (1.1.21 (c)) | 1 |