Most common failures | No# failures |
---|
Steering headbearing has excessive free play |2.2.2| | 3 |
Direction indicators not working |1.5.1c| | 2 |
Headlamp aim out of alignment | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Offside Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Front Upper Front suspension assembly component loose |2.3.1| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Offside Front Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Motorcycle structure excessively distorted |6.1.1a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
All direction indicators adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
Horn sound not in accordance with requirements |7.7 |c|| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Horn not working |1.7.3a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Outer Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Centre Rear Wheel spoke excessively corroded |4.2.1b| | 1 |
Centre Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Front Brake lining|s| contaminated by oil or grease |3.2.A1k| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
All direction indicators not working not flashing-non runner (4.4.1 (a) (ii)) | 1 |
Headlamp aim not tested non runner (4.1.2 (b)) | 1 |
Rear Position lamp not working non runner (4.2.1 (a)) | 1 |
Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment no adjustment left -needs new shoes (1.1.15 (f)) | 1 |
Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
Front Brake lever not releasing correctly and functionality of brakes affected cable needs lube (1.1.2 (b) (ii)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |