| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 9 |
| Rear reflector on motorcycle missing |1.4.1| | 9 |
| Registration plate issues | 8 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
| Steering headbearing has excessive free play |2.2.2| | 3 |
| Nearside Rear Footrest missing |6.2.1a| | 3 |
| Offside Rear Footrest missing |6.2.1a| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Rear Footrest missing |6.2.1a| | 2 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Headlamp switch faulty |1.2.4| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Stop lamp remains on when the brakes are released | 2 |
| Horn not working |1.7.3a| | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Rear mono-shock pivot seized |2.4.B.4| | 1 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Horn not working |1.7.3a| | 1 |
| Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Suspension rod mounting modified so the suspension is inoperative rear linkage seized (5.3.3 (c) (ii)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak fork seal leaking. (5.3.2 (b)) | 1 |
| Rear Valve stem seriously misaligned (5.2.3 (j)) | 1 |
| Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| An item not tested |Manual| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Lower Rear mono-shock pivot excessively worn marked |2.4.B.4| | 1 |
| Rear Position lamp adversely affected by the operation of another lamp |4.2.3 |b|| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Front Headlamp switch faulty |1.2.4| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Position lamp switch insecure |1.1.4b| | 1 |
| Front Motorcycle structure cracked |6.1.1a| | 1 |
| Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Brake pedal attachment screws missing. |3.1.2b| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Central Front Headlamp aim so that beam "kick up" is not visible on the screen headlight needed tape to fix kickup (4.1.2 (a)) | 1 |
| Central Rear Stop lamp adversely affected by the operation of another lamp repaired at station (4.3.3 (b)) | 1 |
| Nearside Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Brake component damaged and seriously reduced in strength |3.2.A1| | 1 |
| Motorcycle structure cracked |6.1.1a| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Rear reflector on sidecar missing |1.4.1| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Front Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Nearside Rear Lower Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Nearside Front Lower Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Front Brake lagging in operation (1.2.1 (d)) | 1 |
| Front Upper Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Motorcycle structure excessively distorted |6.1.1a| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Rear reflector missing reflector fitted (4.8.2 (a) (ii)) | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Horn missing |1.7.1| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
| Offside Rear Footrest missing |6.2.12 |a|| | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |