Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Direction indicator not working |1.5.1c| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Direction indicators not working all indicators not working |1.5.1c| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Footrest insecure both sides missing securing clips (6.2.12 (a)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Nearside Footrest insecure |6.2.12 |a|| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Indicator tell tale not functioning |1.5.2| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
Rear Brake component insecure brake drum stabiliser bar (1.1.21 (c)) | 1 |
Brake performance not tested |3.3| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Footrest missing |6.2.1a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Brake locking device missing |3.2.A1e| | 1 |