| Most common failures | No# failures |
|---|
| Direction indicators not working |1.5.1c| | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Headlamp aim out of alignment | 2 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Nearside Fuel system component leaking |7.2.1a| | 1 |
| Front Brake cable excessively corroded |3.2.A1b| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Front Stop lamp switch with a delay in operation front switch missing (4.3.2 (a) (ii)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Brake cable insecure lock nuts lose (1.1.15 (c)) | 1 |
| Offside Rear Brake rod insecure rear brake arm lock pin missing (1.1.15 (c)) | 1 |
| Rear Brake cylinder operating mechanism has excessive travel (1.1.16 (e) (i)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Front Wheel spoke excessively loose (5.2.2 (d)) | 1 |
| Front Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Fuel hose leaking |7.2.1a| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Registration plate issues | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Front Front suspension assembly component loose |2.3.1| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |