Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 43 |
Brake pipe excessively corroded | 27 |
Headlamp aim out of alignment | 27 |
Registration plate lamp issues | 15 |
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 10 |
Offside Front position lamp|s| not working |1.1.A.3b| | 9 |
Parking brake lever has no reserve travel |3.1.6b| | 7 |
Nearside Stop lamp not working |1.2.1b| | 7 |
Offside Stop lamp not working |1.2.1b| | 7 |
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 6 |
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 6 |
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 6 |
Offside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 5 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 5 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 5 |
Offside Headlamp not working on dipped beam |1.7.5a| | 4 |
Windscreen wiper blade insecure | 4 |
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 4 |
Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 4 |
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 4 |
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 4 |
Anti-lock braking system warning lamp indicates an ABS fault | 3 |
Brakes imbalanced across an axle | 3 |
Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 3 |
Offside Front Position lamp not working |4.2.1 |a|| | 3 |
Engine MIL inoperative or indicates a malfunction |8.2.1.2 |h|| | 3 |
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 3 |
Offside Rear Stop lamp not working |1.2.1b| | 3 |
Nearside Rear Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 3 |
Offside Stop lamp|s| not working |4.3.1 |a| |ii|| | 3 |
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Offside Headlamp lens seriously defective (4.1.1 (b) (ii)) | 3 |
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b)) | 2 |
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 2 |
Offside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 2 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
Nearside Front Position lamp not working |4.2.1 |a|| | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 2 |
Mechanical brake component has restricted free movement | 2 |
Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 2 |
Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 2 |
Nearside Headlamp not working on main beam |1.7.5a| | 2 |
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
Offside Front Service brake excessively binding (1.2.1 (f)) | 2 |
Offside Rear Anti-roll bar linkage fractured |2.4.G.1| | 2 |
Offside front brake binding |3.7.B.1| | 2 |
Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 2 |
Offside Front Road wheel fixing missing (5.2.1 (a) (i)) | 2 |
Nearside Rear Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 2 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
Centre Front Parking brake lever is impeded in its travel |3.1.6c| | 2 |
Offside Front Lower Engine mounting damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 2 |
Nearside Front Drive shaft badly damaged (6.1.7 (e)) | 2 |
Exhaust emissions likely to be affected by an exhaust leak |8.2.1.1 |b|| | 2 |
Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 2 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 2 |
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer`s specified limits |8.2.1.2 |a|| | 2 |
Exhaust Lambda reading after 2nd fast idle outside specified limits |8.2.1.2 |c|| | 2 |
Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 2 |
Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Offside Side repeater incorrect colour |4.4.3 |a|| | 1 |
Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Rear brake disc in such a condition that it is seriously weakened | 1 |
Nearside Parking brake inoperative on one side |1.4.1 |a|| | 1 |
Offside Front Service brake excessively binding |1.2.1 |f|| | 1 |
Brake fluid contaminated |1.8 |a|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Both rear arches badly corroded |6.1.B.2| | 1 |
Brake pedal anti-slip provision worn smooth (1.1.2 (c)) | 1 |
Nearside Front Side repeater not working (4.4.1 (a) (ii)) | 1 |
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Nearside front jacking point/subrame (6.2.2 (d) (i)) | 1 |
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting offside front jacking point/subrame (6.2.2 (d) (i)) | 1 |
Offside Floor in such a condition it is likely to cause load insecurity or instability Floor along the sill (6.2.4 (a) (ii)) | 1 |
Offside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 1 |
Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Nearside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front coil spring broken |2.4.C.1a| | 1 |
Offside Front coil spring broken |2.4.C.1a| | 1 |
Parking brake lever has excessive movement indicating incorrect adjustment |1.1.6 |c|| | 1 |
Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits |8.2.1.2 |b|| | 1 |
Nearside Upper Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Outer Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Outer Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Front Outer Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch/step area (6.1.1 (c) (i)) | 1 |
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch/step area (6.1.1 (c) (i)) | 1 |
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor/sill/step area (6.1.1 (c) (i)) | 1 |
Offside Rear Anti-roll bar linkage insecure |2.4.G.1| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Rear parking brake recording little or no effort | 1 |
Emissions not tested Due to exhaust blow (8.2.1.2 (d)) | 1 |
Brake fluid warning lamp inoperative |3.6.G.2| | 1 |
Supplementary Restraint System warning lamp indicates a fault |5.4.2| | 1 |
Centre Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Rear reflector missing |1.5.1a| | 1 |
Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Rear brake application uneven | 1 |
Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
Offside Rear Anti-roll bar linkage fractured (5.3.3 (b) (ii)) | 1 |
Emissions not tested due to exhaust blows (8.2.1.2 (d)) | 1 |
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Offside Rear Seat belt missing (7.1.2 (a)) | 1 |
Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g)) | 1 |
Nearside Front Service brake excessively binding (1.2.1 (f)) | 1 |
Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Rear Suspension arm pin or bush excessively worn Rear diff mounting arm bush (5.3.4 (a) (i)) | 1 |
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
Offside Front Outer Vehicle structure is fractured and structural rigidity is significantly reduced Hole in the chassis leg |6.1.1 |a| |i|| | 1 |
Offside Rear Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Rear Inner Anti-roll bar pin or bush excessively worn Both D bushes |5.3.4 |a| |i|| | 1 |
Nearside Rear Suspension rod pin or bush excessively worn Rear of axle |5.3.4 |a| |i|| | 1 |
Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Offside Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Offside Rear Upper Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Offside Front Wheel nut|s| missing |4.2.A.1e| | 1 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer`s specified limits |8.2.1.2 |a|| | 1 |
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1 |
Stop lamp|s| not working both |4.3.1 |a| |ii|| | 1 |
Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Side sill (5.3.6 (a) (i)) | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Side sill (5.3.6 (a) (i)) | 1 |
Offside Rear Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 1 |
Offside Rear Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Offside Front Lower Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill stop end (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill stop end (5.3.6 (a) (i)) | 1 |
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Side sill (5.3.6 (a) (i)) | 1 |
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength side sill (5.3.6 (a) (i)) | 1 |
Offside Rear All position lamps not working |1.1.A.3b| | 1 |
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a)) | 1 |
Nearside Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Rear Upper Position lamp not working (4.2.1 (a) (ii)) | 1 |
Rear Anti-roll bar linkage ball joint excessively worn Both (5.3.4 (a) (i)) | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
front brake binding both front wheels |3.7.B.1| | 1 |
Windscreen washer not working | 1 |
Parking brake lever has excessive movement indicating incorrect adjustment no reserve travel (1.1.6 (c)) | 1 |
Offside Front Brake performance not tested Broken spring may cause damage (1.2.1 (g)) | 1 |
Offside Rear passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 1 |
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Central Stop lamp not working |1.2.1b| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Front Windscreen wiper not working |3.4 |a|| | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Rear Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Rear Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Offside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Rear Anti-roll bar pin or bush excessively worn D bush worn (5.3.4 (a) (i)) | 1 |
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced wheelarch/door jam area (7.1.1 (a) (i)) | 1 |
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced wheelarch/door jam area (7.1.1 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
Exhaust carbon monoxide content at idle exceeds manufacturers specified limits (8.2.1.2 (b)) | 1 |
Parking brake lever is impeded in its travel |3.1.6c| | 1 |
Nearside Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
Rear Exhaust system insecure (6.1.2 (a)) | 1 |
Exhaust carbon monoxide content at idle exceeds default limits |8.2.1.2 |b|| | 1 |
Nearside Front Lower Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
Exhaust carbon monoxide content at idle exceeds manufacturer`s specified limits |8.2.1.2 |b|| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Anti-roll bar linkage likely to become detached detached. (5.3.3 (a) (ii)) | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floorpan detached from sill (6.1.1 (c) (i)) | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Nearside Steering locking device missing |2.2.C.1g| | 1 |
Nearside Front Lower Steering locking device missing |2.2.C.1g| | 1 |
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6| | 1 |
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6| | 1 |
Emissions not tested water leak |7.3.A.1| | 1 |
Offside Front Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 1 |
Offside Rear Brake pipe at imminent risk of failure or fracture leaking fluid |1.1.11 |a|| | 1 |
Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 1 |
Nearside Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Exhaust system insecure |6.1.2 |a|| | 1 |
Emissions not tested |8.2.1.2 |d|| | 1 |
Offside Front Anti-roll bar linkage ball joint likely to become detached |5.3.4 |a| |ii|| | 1 |
Nearside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
Offside Rear Wheel nut|s| missing |4.2.A.1e| | 1 |
Offside Front Position lamp not working |4.2.1 |a| |ii|| | 1 |
Nearside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Nearside Rear Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Offside Rear Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Offside Windscreen wiper not working |3.4 |a|| | 1 |
Nearside Rear Lower Anti-roll bar insecure |2.4.G.1| | 1 |
Nearside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Obligatory mirror missing |8.1.1| | 1 |
Offside Rear Shock absorbers has a serious fluid leak | 1 |
Nearside Rear Shock absorbers has a serious fluid leak | 1 |
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Nearside Front Service brake grabbing severely Brake seized on |1.2.1 |c|| | 1 |
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill corroded as marked b (6.2.2 (d) (i)) | 1 |
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill corroded as marked (6.2.2 (d) (i)) | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Registration plate issues | 1 |
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Brake hose excessively deteriorated | 1 |
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill floor area |6.1.1 |c| |i|| | 1 |
Fuel cap/sealing device ineffective (6.1.3 (b) (i)) | 1 |
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i)) | 1 |
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i)) | 1 |
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Central Exhaust has a major leak of exhaust gases flange and next to hanger strap (6.1.2 (a)) | 1 |
Nearside Front Lower Engine mounting damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
Emissions not tested due to exhaust (8.2.1.2 (d)) | 1 |
Offside Front Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 1 |