Most common failures | No# failures |
---|
Horn not working |1.7.3a| | 5 |
Headlamp aim out of alignment | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Fuel system component leaking |7.2.1a| | 4 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Rear Brake locking device missing |3.2.A1e| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Direction indicators not working |1.5.1c| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Offside Indicator switch defective |1.5.4| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Offside Outer Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Inner Rear Lower Drive chain excessively loose |6.2.1d| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Nearside Inner Rear Lower Drive chain sprocket worn to excess |6.2.1e| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Offside Rear Lower Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Footrest insecure |6.2.1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Registration plate lamp issues | 1 |
Front Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear Brake component has an inadequate repair |3.1.5| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Brake reaction bracket insecure |3.2.A1j| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Footrest missing |6.2.12 |a|| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front Wheel spoke excessively corroded |4.2.1b| | 1 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Motorcycle structure joining/attachment plate or fastening insecure |6.1.1 |b| |i|| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |