>

MOT History from tests of petrol HONDA GL1500SEs year 1996

Review the list of common HONDA GL1500SE failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:87.65%
(The average a petrol HONDA GL1500SE year 1996 passes without issue)
Based on:413 MOT Tests
Most common failuresNo# failures
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|9
Registration plate issues6
Headlamp aim out of alignment6
Headlamp incorrect colour |1.2.1|3
Rear Brake pedal has inadequate reserve travel |3.1.3b|3
Rear Hydraulic brake control feels spongy |3.1.4a|2
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Nearside Front position lamp incorrect colour |1.1.2a|2
Offside Front position lamp incorrect colour |1.1.2a|2
Rear suspension component excessively corroded. |2.4.A.1a|2
Front wheel bearings have excessive free play |2.3.5b|2
Rear Brake disc|s| excessively worn |3.2.A1l|2
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d|2
Nearside Rear Hydraulic brake calliper leaking |1.1.16 |b| |i||1
Rear Stop lamp(s) all not working when opperated by hand controle for front brakes (4.3.1 (a) (iii))1
Exhaust has a major leak of exhaust gases |7.1.2|1
Rear Stop lamp not working |4.3.1 |a| |ii||1
Horn not working |1.7.3a|1
Stop lamp affected by the operation of another lamp |1.3.2|1
Offside Front Direction indicators affected by the operation of another lamp |1.5.1c|1
Nearside Front Direction indicator damaged and function impaired |1.5.3a|1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Front position lamp adversely affected by the operation of another lamp |1.1.3b|1
Brake pedal is inoperative |3.1.3c|1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Rear Brake caliper operating mechanism has excessive travel (1.1.16 (e) (i))1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
All position lamps adversely affected by the operation of another lamp |1.1.3b|1
Front position lamp incorrect colour |1.1.2a|1
Service brake efficiency below requirements (1.2.2 (a) (i))1
Nearside Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i||1
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii))1
Handlebar grip insecure to handlebar left hand grip loose (2.2.1 (d) (ii))1
Offside Rear brake caliper leaking Rear inner hub seal leaking contaminating rear disc |3.6.A.1|1
Nearside Rear Upper Stop lamp affected by the operation of another lamp |1.3.2|1
Nearside Rear Lower Stop lamp affected by the operation of another lamp |1.3.2|1
Stop lamp not working When either brake applied (4.3.1 (a) (ii))1
Offside Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a||1
Rear Brake cable insecure1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Motorcycle structure excessively corroded |6.1.1a|1
All position lamps not working |4.2.1 |a||1
Stop lamp emits other than a steady red light |1.3.1b|1
Stop lamp does not emit a steady light |1.3.1b|1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Offside Front shock absorber seal failed and leaking oil |2.3.3|1
Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Rear suspension component excessively corroded. nearside inner holed |2.4.A.1a|1
Front Brake performance not tested Due to condition of pads (1.2.1 (g))1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Offside Exhaust is leaking and excessively noisey |7.1.1b|1
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a|1
Service brake: efficiency below requirements |3.7.B.7|1
Rear Brake pedal has insufficient reserve travel |1.1.2 |a||1
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||1
Nearside Rear Direction indicator incorrect colour |1.5.1b|1
Offside Rear Direction indicator incorrect colour |1.5.1b|1
Exhaust is leaking and excessively noisey |7.1.1b|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy