| Most common failures | No# failures |
|---|
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Brake performance not tested (1.2.1 (g)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Nearside Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Front Brake hose leaking do not drive (1.1.12 (c)) | 1 |
| Nearside Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Rear Brake disc|s| insecure |3.2.A1g| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Nearside Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front An item not tested |Manual| | 1 |
| Rear An item not tested |Manual| | 1 |
| Rear Brake pedal is inoperative |3.1.3c| | 1 |
| Offside Front Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front wheel bearings are excessively tight unable to rotate wheel due to brake binding |2.3.5b| | 1 |
| Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Brake pipe excessively corroded | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Offside Front Brake hose excessively twisted (1.1.12 (b) (ii)) | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Rear Rear position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 1 |
| Offside Rear Rear position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Offside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
| Registration plate issues | 1 |
| Front Shock absorbers has a serious fluid leak fork seals seam to be leaking (5.3.2 (b)) | 1 |
| Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Body insecure mud guard brackets (6.2.2 (a) (i)) | 1 |
| Horn not working |1.6.2a| | 1 |
| Steering system fouling |2.2.D.2a| | 1 |
| Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Service brake: efficiency below requirements |3.7.C.1a| | 1 |
| Headlamp aim out of alignment | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Riders seat insecure |6.2.1a| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Stop lamp insecure |1.3.3b| | 1 |