| Most common failures | No# failures |
|---|
| Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
| Registration plate issues | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Headlamp aim out of alignment | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Exhaust is leaking and excessively noisey @ front pipe |7.1.1b| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| All position lamps not working (4.2.1 (a)) | 1 |
| Registration plate lamp issues | 1 |
| Stop lamp not working rear brake operation (4.3.1 (a) (ii)) | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Offside Outer Rear Upper Tie bar/rod locating pin locking device not properly locked |2.4.G.3b| | 1 |
| Parking brake lever, pawl mechanism pivot|s| or their associated mountings locking device insecure |3.1.4b| | 1 |
| Rear Hydraulic brake cylinder insecurely mounted |3.6.A.2a| | 1 |
| Parking brake lever pawl spring does not push the pawl positively into the ratchet teeth |3.1.5| | 1 |
| Brake cable inappropriately repaired |3.5.1n| | 1 |
| Brake hose has insufficient room to move | 1 |
| Offside Rear Footrest insecure |9.6.1| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Rear Stop lamp not working |1.2.1b| | 1 |
| Horn not working |1.6.2a| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Central Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Horn not working |1.7.3a| | 1 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Nearside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Nearside Rear Lower Brake excessively binding (1.2.1 (f)) | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Front Upper Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Centre Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Front wheel spindle securing nut|s| loose Clamp bolts |2.3.5a| | 1 |
| Nearside Front Brake component is excessively corroded |3.1.5| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Central Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Offside Rear Upper Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |