>

MOT History from tests of petrol HONDA FJSs year 2007

Review the list of common HONDA FJS failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:88.83%
(The average a petrol HONDA FJS year 2007 passes without issue)
Based on:609 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment7
Front Roller brake test indicates a binding brake |3.3.A1a|7
Rear Roller brake test indicates a binding brake |3.3.A1a|4
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Rear Brake excessively binding (1.2.1 (f))4
Rear Floor brake test indicates a binding brake |3.3.C2c|3
Registration plate lamp issues3
Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Offside Front shock absorber seal failed and leaking oil |2.3.3|2
Rear Stop lamp not working (4.3.1 (a) (ii))2
Front Brake excessively binding (1.2.1 (f))2
Steering movement excessively `notchy` with the wheel raised |2.2.1b|2
Nearside Front shock absorber seal failed and leaking oil |2.3.3|2
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c|2
Sidecar structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced |6.1.1 |b| |ii||1
Suspension arm pin or bush excessively worn sidecar suspension arm |5.3.4 |a| |i||1
Front Floor brake test indicates a binding brake |3.3.C2c|1
Nearside Front Stop lamp does not illuminate by the operation of both brake controls brake lever switch (4.3.2 (a) (iii))1
Offside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b))1
Rear Stop lamp not working rear brake light switch (4.3.1 (a) (ii))1
Rear Stop lamp not working rear brake light switch not working (4.3.1 (a) (ii))1
Front Brake caliper leaking (1.1.16 (b) (i))1
Front Brake disc contaminated (1.1.14 (b))1
Brake performance unable to be tested (1.2.1 (g))1
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Front Wheel bearing has excessive play (5.1.3 (a) (i))1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Front Hydraulic brake control feels spongy |3.1.4a|1
Front Brake lever has inadequate reserve travel |3.1.3b|1
Front Brake lever has restricted free movement (1.1.15 (e))1
Rear Brake lever has restricted free movement (1.1.15 (e))1
Wheel damaged or distorted to the extent that control of the motorcycle is likely to be adversely affected (5.2.2 (c) (ii))1
Headlamp not working on main beam (4.1.1 (a) (ii))1
Suspension component pin or bush excessively worn sidecar shock bush |5.3.4 |a| |i||1
Front Brake lever cannot be applied smoothly |3.1.3d|1
Nearside Rear Position lamp not working |4.2.1 |a||1
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e||1
Rear Brake lever has restricted free movement |1.1.15 |e||1
Front Wheel bearing rough when rotated (5.1.3 (b) (i))1
Offside Rear Shock absorber has negligible damping effect (5.3.2 (b))1
Stop lamp not working not working on rear brake lever (4.3.1 (a) (ii))1
Direction indicator not working (4.4.1 (a) (ii))1
Nearside Rear Shock absorber has negligible damping effect (5.3.2 (b))1
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Rear Brake excessively binding |1.2.1 |f||1
Front Brake disc|s| excessively worn |3.2.A1l|1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Rear Valve stem seriously damaged (5.2.3 (j))1
Headlamp aim beam image kick up to the offside |1.6|1
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e||1
Front wheel bearings have excessive free play |2.3.5b|1
Rear Brake disc|s| cracked |3.2.A1g|1
Front Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii||1
Rear Brake disc|s| excessively scored |3.2.A1l|1
Front Shock absorber has a serious fluid leak forks leaking |5.3.2 |b||1
Horn not working |1.7.3a|1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Front wheel bearings are excessively rough |2.3.5b|1
Steering operation restricted in free movement from lock to lock |2.1.4 |c||1
Nearside Rear Position lamp not working (4.2.1 (a))1
Nearside Rear Stop lamp not working (4.3.1 (a) (ii))1
Front Steering headbearing in such a condition that steering control is adversely affected head bearings notchy |2.2.2 |f| |ii||1
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Rear Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Registration plate issues1
Front Shock absorber has a serious fluid leak (5.3.2 (b))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy