>

MOT History from tests of petrol HONDA FES250s year 2001

Review the list of common HONDA FES250 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:85.25%
(The average a petrol HONDA FES250 year 2001 passes without issue)
Based on:949 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment18
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|11
Rear Brake lever has inadequate reserve travel |3.1.3b|8
Stop lamp does not illuminate immediately a brake applies |1.3.1a|7
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|7
Front Roller brake test indicates a binding brake |3.3.A1a|5
Steering movement excessively `notchy` with the wheel raised |2.2.1b|5
Registration plate issues5
Stop lamp remains on when the brakes are released5
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Horn not working |1.7.3a|3
Exhaust has a major leak of exhaust gases (6.1.2 (a))3
Rear Roller brake test indicates a binding brake |3.3.A1a|3
Direction indicators not working |1.5.1c|3
Rear wheel has a loose wheel nut|s| |4.2.3a|2
Front Steering headbearing has excessive free play |2.2.2|2
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))2
Front Brake disc|s| excessively worn |3.2.A1l|2
Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Throttle operating incorrectly |6.2.1f|2
Front Roller brake test indicates a sticking brake |3.3.A1a|2
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Exhaust is leaking and excessively noisey |7.1.1b|2
Rear Exhaust is leaking and excessively noisey |7.1.1b|2
Brake lever has inadequate reserve travel |3.1.3b|2
Stop lamp remains on when the brake is released |1.3.1e|2
Wheel alignment incorrect which adversely affects the handling |2.5.1|2
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|2
Direction indicator not working |1.5.1c|2
Front Front wheel bearings are excessively rough |2.3.5b|1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Front Exhaust is leaking and excessively noisey |7.1.1b|1
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i||1
Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii||1
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||1
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b|1
Steering headbearing has excessive free play |2.2.2|1
Front Brake component worn and seriously reduced in strength |3.2.A1|1
Direction indicator damaged and function impaired |1.5.3a|1
Rear Wheel spindle loose (5.2.1 (c) (i))1
Front Brake grabbing severely (1.2.1 (c))1
Nearside Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii))1
Offside Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii))1
Front Valve stem seriously damaged (5.2.3 (j))1
Rear Valve stem seriously damaged (5.2.3 (j))1
Central Rear Lower Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Exhaust has a major leak of exhaust gases Rear box corroded through |6.1.2 |a||1
Throttle operating incorrectly sticking |6.2.1f|1
Rear Hydraulic brake control feels spongy |3.1.4a|1
Front Brake lever cannot be applied smoothly |3.1.3d|1
Rear Brake lever is inoperative |3.1.3c|1
Nearside Rear Position lamp not working (4.2.1 (a))1
Rear Exhaust excessively deteriorated |7.1.1a|1
Front Decelerometer brake test indicates a binding brake |3.3.E1d|1
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Front Dipswitch does not operate immediately when selected on main beam (4.1.3 (b))1
Nearside Front Brake lever has insufficient reserve travel lever fouls handle bar when fully applied (1.1.2 (a))1
Offside Rear Direction indicator not working |1.5.1c|1
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Rear position lamp damaged and function impaired |1.1.1b|1
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Rear Wheel has an excessively distorted bead rim. |4.2.2|1
Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced (6.1.1 (b) (ii))1
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Shock absorber has a serious fluid leak (5.3.2 (b))1
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Fairing insecure and likely to impede the steering |2.1.2e|1
Front Brake disc|s| is excessively distorted |3.2.A1m|1
Nearside Brake lever has insufficient reserve travel (1.1.2 (a))1
Rear Rear reflector on motorcycle missing |1.4.1|1
Stop lamp does not illuminate immediately a brake applies rear brake control |1.3.1a|1
Front wheel bearings are excessively rough |2.3.5b|1
Riders seat insecure |6.2.1a|1
Nearside Front Direction indicator insecure |1.5.3b|1
Centre Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Wheel alignment incorrect which adversely affects the handling (2.4 (a))1
Exhaust has a major leak of exhaust gases |6.1.2 |a||1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Offside Front Brake lever has inadequate reserve travel |3.1.3b|1
Stop lamp not working (4.3.1 (a) (ii))1
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Stop lamp not working Front operated. |4.3.1 |a| |ii||1
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Front Brake fluid reservoir fluid not visible |1.1.10 |d| |iii||1
Rear Brake fluid reservoir fluid not visible |1.1.10 |d| |iii||1
Rear Stop lamp does not emit a steady light |1.3.1b|1
Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c))1
Front Floor brake test indicates a binding brake |3.3.C2c|1
An item not tested |Manual|1
Rear Stop lamp not working |4.3.1 |a| |ii||1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy