Most common failures | No# failures |
---|
Headlamp aim out of alignment | 15 |
Registration plate lamp issues | 11 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 9 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Registration plate issues | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Stop lamp remains on when the brakes are released | 3 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 2 |
Front Position lamp not working Both (4.2.1 (a)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Nearside Front Position lamp not working (4.2.1 (a)) | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Valve stem seriously damaged SPLIT. (5.2.3 (j)) | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 1 |
Headlamp aim not tested |1.6| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Offside Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Front Headlamp missing |1.2.3a| | 1 |
Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies Lever |1.3.1a| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies Switch |1.3.1a| | 1 |
Rear Stop lamp remains on when the brake is released brake lever pivot bolt |1.3.1e| | 1 |
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Stop lamp does not illuminate immediately a brake applies both controls |1.3.1a| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Brake lever insecure |3.1.2a| | 1 |
Headlamp damaged and function impaired |1.2.3a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear brake disc in such a condition that it is seriously weakened | 1 |
Headlamp insecure |1.2.3b| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake lever not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 1 |
Rear Brake disc fractured |1.1.14 |a| |ii|| | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Brake component damaged and seriously reduced in strength caliper hanger |3.2.A1| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Front position lamp missing |1.1.1a| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak at fork seal (5.3.2 (b)) | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Rear Brake caliper inadequately mounted (1.1.16 (c) (i)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Front suspension assembly component excessively corroded. front forks |2.3.1| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Stop lamp not working fit a new brake switch |4.3.1 |a| |ii|| | 1 |
Front Stop lamp not working front brake switch faulty |4.3.1 |a| |ii|| | 1 |
Offside Rear Upper All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Stop lamp missing |1.3.3a| | 1 |
Offside Front Suspension attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |