>

MOT History from tests of petrol HONDA FESs year 2012

Review the list of common HONDA FES failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:82.83%
(The average a petrol HONDA FES year 2012 passes without issue)
Based on:1,054 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment24
Registration plate lamp issues22
Stop lamp does not illuminate immediately a brake applies |1.3.1a|9
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|7
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||6
Front Roller brake test indicates a binding brake |3.3.A1a|6
Front Brake excessively binding (1.2.1 (f))6
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|6
Rear Stop lamp not working (4.3.1 (a) (ii))6
Headlamp not working on dipped beam |4.1.1 |a| |ii||4
Stop lamp not working (4.3.1 (a) (ii))3
Steering headbearing has excessive free play |2.2.2|3
Headlamp not working on dipped beam (4.1.1 (a) (ii))3
Front position lamp does not illuminate immediately when switched on |1.1.3a|3
Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))3
Front Brake excessively binding |1.2.1 |f||2
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))2
Rear Valve stem seriously damaged (5.2.3 (j))2
Nearside Rear Stop lamp not working (4.3.1 (a) (ii))2
Offside Rear Stop lamp not working |4.3.1 |a| |ii||2
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))2
Rear Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii))2
Riders seat insecure (6.2.5 (a) (ii))2
Rear Brake lever has inadequate reserve travel |3.1.3b|2
Registration plate issues2
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))2
Brake performance not tested (1.2.1 (g))2
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Stop lamp remains on when the brakes are released2
Front Brake disc|s| excessively worn |3.2.A1l|2
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))2
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))2
Steering operation impeded by a fairing (2.1.4 (e))2
Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b))2
Front Stop lamp not working (4.3.1 (a) (ii))2
Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Nearside Front Brake fluid reservoir fluid not visible rear brake (1.1.10 (d) (iii))1
Rear Brake excessively binding (1.2.1 (f))1
Rear Brake fluid reservoir fluid level significantly below minimum level |1.1.10 |d| |ii||1
Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
Seat insecure |6.2.1a|1
Front Brake master cylinder has an excessively worn master cylinder pivot. |3.2.B5|1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|1
Front Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Front Stop lamp not working |4.3.1 |a| |ii||1
Rear Brake excessively binding |1.2.1 |f||1
Rear Brake disc|s| has excessive run out |3.2.A1m|1
Offside Front Position lamp not working |4.2.1 |a||1
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i||1
Offside Rear Stop lamp not working (4.3.1 (a) (ii))1
Headlamp aim not tested bulb not working (4.1.2 (b))1
Offside Position lamp not working |4.2.1 |a||1
Front Handlebar mounting clamp bolt loose |2.1.1a|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Stop lamp not working both (4.3.1 (a) (ii))1
Offside Front Motorcycle structure joining/attachment plate or fastening insecure mirror assembly (6.1.1 (b) (i))1
Nearside Direction indicator not working (4.4.1 (a) (ii))1
Headlamp not working on main beam (4.1.1 (a) (ii))1
Front Brake hose leaking (1.1.12 (c))1
Rear Shock absorber insecurely attached |5.3.2 |a| |i||1
Horn not working (7.7 (a) (ii))1
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Stop lamp remains on when the brake is released |1.3.1e|1
Nearside Stop lamp not working (4.3.1 (a) (ii))1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Rear Brake disc|s| excessively worn |3.2.A1l|1
Rear Position lamp not working (4.2.1 (a))1
Direction indicator obscured |1.5.1a|1
Stop lamp deteriorated and function impaired |1.3.3a|1
Offside Stop lamp not working |4.3.1 |a| |ii||1
Nearside Front Position lamp not working |4.2.1 |a||1
Headlamp not working on main beam |4.1.1 |a| |ii||1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Throttle operating incorrectly Sticking open |6.2.1f|1
Offside Rear Direction indicator not working (4.4.1 (a) (ii))1
Front Upper Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Offside Front Stop lamp not working (4.3.1 (a) (ii))1
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Stop lamp does not illuminate immediately a brake applies rear brake bulb changed |1.3.1a|1
Front Headlamp not working on main beam (4.1.1 (a) (ii))1
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Position lamp not working |4.2.1 |a||1
Dipswitch does not operate immediately when selected on dipped beam |4.1.3 |b||1
Stop lamp not working front brake light switch |4.3.1 |a| |ii||1
Handlebar mounting clamp bolt loose |2.1.1a|1
Nearside Front Position lamp not working Town light (4.2.1 (a))1
Front Brake lining|s| less than 1.0 mm thick |1.1.13 |a||1
Horn control not functioning. |1.7.2b|1
Stop lamp not working stop lgith not work (4.3.1 (a) (ii))1
Nearside Brake lever insecure locknut missing - fitted new |1.1.2 |e| |i||1
Nearside Front All position lamps do not illuminate immediately when switched on |1.1.3a|1
Nearside Rear Shock absorber insecurely attached |5.3.2 |a| |i||1
Front wheel bearings have excessive free play |2.3.5b|1
Stop lamp does not illuminate immediately a brake applies control one |1.3.1a|1
Rear Position lamp not working |4.2.1 |a||1
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii))1
Handlebar retaining device loose (2.2.1 (b) (i))1
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i||1
Handlebar handgrip not secure to handlebars. lh grip loose |2.1.1c|1
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e||1
Nearside Rear Shock absorber has a serious fluid leak marked yellow (5.3.2 (b))1
Nearside Rear Shock absorber has negligible damping effect marked yellow (5.3.2 (b))1
Front Brake grabbing severely |1.2.1 |c||1
Nearside Stop lamp remains on when the brake is released |1.3.1e|1
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Nearside Front Position lamp not working (4.2.1 (a))1
Offside Front Position lamp not working (4.2.1 (a))1
Stop lamp not working |4.3.1 |a| |ii||1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Front Brake disc|s| cracked |3.2.A1g|1
Front Brake disc|s| is excessively distorted |3.2.A1m|1
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Front Position lamp not working (4.2.1 (a))1
Front Brake hose connection leaking (1.1.12 (c))1
Handlebar excessively deformed (2.2.1 (c) (i))1
Handlebar restricted in free movement from lock to lock (2.1.4 (c))1
Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b))1
Front Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii))1
Front Motorcycle structure joining/attachment plate or fastening insecure STEERING COWL INSECURE (6.1.1 (b) (i))1
Front Shock absorber has negligible damping effect (5.3.2 (b))1
Rear Wheel has an excessively distorted bead rim. (4.2.2)1
Rear Rear wheel bearings are excessively rough rear diff / wheel bearings grating and xs noise (2.4.A.2c)1
Offside Rear Footrest missing (6.2.12 (a))1
Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii))1
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Position lamp adversely affected by the operation of another lamp (4.2.3 (b))1
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Headlamp aim headlamp damaged and function impaired LED bulb incorrect for the motorcycle |1.2.3a|1
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Brake master cylinder defective but brake still operating rear brake master cylinder staying on and not releasing on own accord |1.1.10 |b| |i||1
Rear Brake master cylinder fluid level dangerously low |3.2.B1d|1
Rear Brake lever has insufficient reserve travel (1.1.2 (a))1
Front brake disc in such a condition that it is seriously weakened1
Rear brake disc in such a condition that it is seriously weakened1
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii))1
Front Brake component has an inadequate repair |3.1.5|1
Rear Stop lamp not working brake switch (4.3.1 (a) (ii))1
Nearside Rear Direction indicator obviously incorrectly positioned |4.4.3 |a||1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy