MOT History from tests of petrol HONDA DYLANs year 2004

Review the list of common HONDA DYLAN failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history

Pass percent:77.44%

(The average a petrol HONDA DYLAN year 2004 passes without issue)

Based on:133 MOT Tests

Most common failures	No# failures
Front Roller brake test indicates a binding brake \|3.3.A1a\|	5
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	5
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	4
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	3
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	3
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	3
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	2
Headlamp aim out of alignment	2
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	2
Registration plate issues	2
Brake lever cannot be applied smoothly \|3.1.3d\|	1
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	1
Front Stop lamp remains on when the brake is released \|1.3.1e\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Centre Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Stop lamp remains on when the brakes are released	1
Front Brake excessively binding \|1.2.1 \|f\|\|	1
Offside Rear Brake linkage has abnormal movement due to maladjustment \|3.2.A1i\|	1
Rear reflector on motorcycle obscured \|1.4.1\|	1
Stop lamp not working (4.3.1 (a) (ii))	1
Nearside Brake lever cannot be released smoothly \|3.1.3d\|	1
Stop lamp remains on when the brake is released Control two \|1.3.1e\|	1
Horn control defective remains on when pressed \|1.7.2a\|	1
Stop lamp remains on when the brake is released \|1.3.1e\|	1
Horn not working \|1.7.3a\|	1
Nearside Front Brake lever has inadequate reserve travel \|3.1.3b\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Riders seat insecure \|6.2.1a\|	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Rear reflector missing \|4.8.2 \|a\| \|ii\|\|	1
Rear Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Front Roller brake test indicates a binding brake \|3.3.A1a\|	5
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	5
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	4
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	3
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	3
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	3
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	2
Headlamp aim out of alignment	2
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	2
Registration plate issues	2
Brake lever cannot be applied smoothly \|3.1.3d\|	1
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	1
Front Stop lamp remains on when the brake is released \|1.3.1e\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Centre Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Stop lamp remains on when the brakes are released	1
Front Brake excessively binding \|1.2.1 \|f\|\|	1
Offside Rear Brake linkage has abnormal movement due to maladjustment \|3.2.A1i\|	1
Rear reflector on motorcycle obscured \|1.4.1\|	1
Stop lamp not working (4.3.1 (a) (ii))	1
Nearside Brake lever cannot be released smoothly \|3.1.3d\|	1
Stop lamp remains on when the brake is released Control two \|1.3.1e\|	1
Horn control defective remains on when pressed \|1.7.2a\|	1
Stop lamp remains on when the brake is released \|1.3.1e\|	1
Horn not working \|1.7.3a\|	1
Nearside Front Brake lever has inadequate reserve travel \|3.1.3b\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Riders seat insecure \|6.2.1a\|	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Rear reflector missing \|4.8.2 \|a\| \|ii\|\|	1
Rear Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	1

MOT History from tests of petrol HONDA DYLANs year 2004

Find us on Facebook