Most common failures | No# failures |
---|
Headlamp aim out of alignment | 37 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 18 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 13 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Rear reflector on motorcycle missing |1.4.1| | 9 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Registration plate issues | 5 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Horn not working |1.7.3a| | 3 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 2 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Rear mono-shock pivot seized |2.4.B.4| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Brake excessively binding (1.2.1 (f)) | 2 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Motorcycle structure excessively corroded |6.1.1a| | 2 |
Brake performance not tested |3.3| | 2 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 2 |
Front Brake excessively binding |1.2.1 |f|| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Hazard warning lamps inoperative |1.4.B.1b| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Exhaust excessively deteriorated |7.1.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies rear stop lamp |1.3.1a| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Brake pedal attachment screws missing. clevis pin missing |3.1.2b| | 1 |
Brake reaction bracket insecure split pin missing |3.2.A1j| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear suspension component seized |2.4A2a|ii|| | 1 |
Rear Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Nearside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Offside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
An item not tested |Manual| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Rear Suspension arm has excessive play in a pin/bearing swinging arm bearings |2.4.G.2| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Stop lamp not working From control 1 (4.3.1 (a) (ii)) | 1 |
Brake excessively binding front brake binding |1.2.1 |f|| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Offside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Lower Rear suspension component seized |2.4A2a|ii|| | 1 |
Brake lever is inoperative |3.1.3c| | 1 |
Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Brake linked system has a seized caliper pivot. |3.2.B5| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Nearside Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Nearside Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake master cylinder severely damaged |3.2.B1b| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Brake component is excessively corroded |3.1.5| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Offside Front Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Nearside Rear Brake locking device missing |3.2.A1e| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Offside Front Front shock absorber seal failed and leaking oil Excessive fluid found on mudguard and surrounding area |2.3.3| | 1 |
Front Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
Central Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Offside Brake hose leaking fluid |3.2.B4| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Centre Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Fuel pipe union leaking |7.2.1a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Rear reflector on motorcycle insecure |1.4.2c| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Front Brake lever has abnormal movement of levers indicating maladjustment |3.5.1f| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Front Brake linkage excessively damaged |3.2.A1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Coil spring not correctly located |2.4.C.2| | 1 |
Shock absorber has negligible damping effect |2.7.5| | 1 |
Registration plate lamp issues | 1 |
Steering headbearing has excessive free play |9.2.4| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Brakes imbalanced across an axle | 1 |
Front wheel bearings are excessively rough |9.2.8c| | 1 |
Offside Front shock absorber leaking oil |9.2.7b| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Fuel system component leaking |7.2.3| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Driver`s seat insecure |6.2.A.1| | 1 |
Rear Passenger`s seat insecure |6.2.A.1| | 1 |
Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 1 |
Brake hose excessively deteriorated | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |