| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 49 |
| Horn not working |1.7.3a| | 18 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 14 |
| Registration plate issues | 12 |
| Steering headbearing has excessive free play |2.2.2| | 10 |
| Throttle operating incorrectly |6.2.1f| | 9 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 9 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Brake hose excessively deteriorated | 8 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Fuel system component leaking |7.2.1a| | 6 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 5 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 5 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
| Nearside Front Direction indicator not working |1.5.1c| | 4 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 4 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Offside Rear Direction indicator not working |1.5.1c| | 4 |
| Rear reflector on motorcycle missing |1.4.1| | 4 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
| Headlamp switch faulty |1.2.4| | 3 |
| Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
| Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 3 |
| Offside Front Direction indicator not working |1.5.1c| | 3 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 3 |
| Nearside Rear Footrest insecure |6.2.1a| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Nearside Rear Direction indicators not working |1.5.1c| | 3 |
| Riders seat insecure |6.2.1a| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Offside Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 2 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 2 |
| Nearside Rear Motorcycle structure excessively corroded |6.1.1a| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Offside Rear Motorcycle structure excessively corroded |6.1.1a| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Rear Brake locking device missing |3.2.A1e| | 2 |
| Front Brake excessively binding |1.2.1 |f|| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Offside Direction indicators not working |1.5.1c| | 2 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
| Offside Front Footrest insecure |6.2.1a| | 2 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Nearside Steering lock stop ineffective |2.1.3| | 2 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 2 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Front Throttle operating incorrectly |6.2.1f| | 2 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
| Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 2 |
| Front Front mudguard insecure |2.3.7| | 2 |
| Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Brake pedal mounting insecure |3.1.2a| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Offside Front Brake hose stretched by suspension movement |3.2.B3b| | 1 |
| Offside Indicator switch insecure |1.5.4| | 1 |
| Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Nearside Front Front suspension spring worn and seriously weakened |2.3.2b| | 1 |
| Offside Front Front suspension spring worn and seriously weakened |2.3.2b| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front shock absorber seal failed and leaking oil leaking on to front calipers |2.3.3| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Motorcycle structure cracked |6.1.1a| | 1 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Nearside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Lower Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced Swinging arm (6.1.1 (c) (i)) | 1 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
| Rear Parking brake efficiency below requirements |3.7.C.1b| | 1 |
| Nearside Front Steering control handlebar mounted control has no clearance at full lock |9.2.2.b| | 1 |
| Mechanical brake component has restricted free movement | 1 |
| Horn not working |1.6.2a| | 1 |
| Front Front wheel spindle securing nut locking device missing |9.2.8b| | 1 |
| Steering headbearing has excessive free play |9.2.4| | 1 |
| Mechanical brake component locking device insecure |3.5.1l| | 1 |
| Trikes, quads or pre-68 vehicles, service brake efficiency below requirements |3.7.B.7| | 1 |
| Stop lamp(s) all not working on rear foot brake (4.3.1 (a) (iii)) | 1 |
| Forks in such a condition that steering control is adversely affected out of alignment (2.2.2 (f) (ii)) | 1 |
| Front Brake hose damaged and likely to fail brake hose being pinched against petrol tank on right hand lock (1.1.12 (a)) | 1 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Brake cable guide defective and affecting operation hand brake cable,cable tube incorrect position effecting hand brake lever operation (1.1.15 (d)) | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
| Brake pedal has excessive side movement indicating a badly worn bearing or pivot |3.3.A.1d| | 1 |
| Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Front Brake hose leaking fluid |3.2.B4| | 1 |
| Footrest missing |6.2.1a| | 1 |
| Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Offside Rear Shock absorber has an excessively worn bush |5.3.2 |c|| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
| Nearside Front Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Front Suspension insecurely attached fork gaitor |5.3.3 |a| |i|| | 1 |
| Front Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
| Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Roller brake test brake efficiency less than 27.5% overall |1.2.2 |a| |ii|| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Front Lower Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Offside Front Lower Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Centre Rear Lower Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Central Front Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Offside Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Offside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Front Wheel fixing loose |single fixing| |5.2.1 |a| |ii|| | 1 |
| Front Headlamp insecure |1.7.3| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Driver`s seat insecure |6.2.A.1| | 1 |
| Brake pipe inadequately supported |3.6.B.1| | 1 |
| Rear parking brake recording little or no effort | 1 |
| Rear Drive shaft uj which forms part of the suspension has excessive play in a universal joint |2.4.G.4b| | 1 |
| Rear Drive shaft uj which forms part of the suspension has a loose flange bolt |2.4.G.4c| | 1 |
| Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Brake pipe excessively corroded | 1 |
| Offside Rear Direction indicators not working |1.4.A.2c| | 1 |
| Headlamp not working on main beam |1.7.5a| | 1 |
| Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Centre Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Outer Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Direction indicator flashing less than 60 times a minute all indicators not flashing at all |1.5.1c| | 1 |
| Steering lock stop ineffective |2.1.3| | 1 |
| Centre Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear suspension component excessively corroded. swing arm |2.4.A.1a| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Brake disc contaminated Both front brake discs (1.1.14 (b)) | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Nearside Front Brake pipe union leaking fluid |3.2.B4| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Front Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Brake locking device missing split pin in brake arm |3.2.A1e| | 1 |
| Nearside Rear Direction indicator not working directional indicator inoperative near side rear |4.4.1 |a| |ii|| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
| Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Steering lock stop maladjusted |2.1.3| | 1 |
| Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Offside Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Nearside Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Brake lever attachment screws missing |3.1.2b| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Offside Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Offside Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Brake hose fouling |3.2.B3b| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Nearside Front Brake pipe excessively damaged |3.2.B2a| | 1 |
| Offside Front Brake pipe excessively damaged |3.2.B2a| | 1 |
| Centre Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Fuel pipe leaking |7.2.1a| | 1 |
| Rear Sidecar attachment insecure |5.1.1b| | 1 |
| Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Centre Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Brake component has an inadequate repair |3.1.5| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Front shock absorber leaking oil |9.2.7b| | 1 |
| Offside Front shock absorber leaking oil |9.2.7b| | 1 |
| Nearside Front suspension inadequate damping effect |9.2.7d| | 1 |
| Offside Front suspension inadequate damping effect |9.2.7d| | 1 |
| Front front brake binding |3.7.B.1| | 1 |
| Front brake disc excessively scored |3.5.1h| | 1 |
| Nearside Rear Rear reflector missing |1.5.1a| | 1 |
| Offside Rear Rear reflector missing |1.5.1a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
| Nearside Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Front Lower Brake pipe union leaking fluid |3.2.B4| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Horn missing |1.7.1| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Nearside Front Steering lock stop maladjusted |2.1.3| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Nearside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Nearside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
| Nearside Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Plate brake test No brake control achieves an efficiency of 30%. |3.3.B2a| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Offside Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Brake hose which buldges |3.2.B4| | 1 |
| Front Brake lever insecure lever lock nut missing (1.1.2 (e) (i)) | 1 |
| Position lamp not working (4.2.1 (a)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Suspension arm attachment bracket/mounting insecure rear swing arm nut loose (5.3.3 (a) (i)) | 1 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Steering headbearing excessively stiff or notchy NOTCHED UNDER WEIGHT (PROBABLY BOTTOM BEARING) (2.2.2 (f) (i)) | 1 |
| Front Upper Throttle operating incorrectly |6.2.1f| | 1 |