| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 10 |
| Registration plate lamp issues | 3 |
| Registration plate issues | 3 |
| Rear Brake locking device missing |3.2.A1e| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Front Brake excessively binding (1.2.1 (f)) | 2 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Rear Motorcycle structure excessively corroded |6.1.1a| | 2 |
| Rear brake binding | 2 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
| Brakes imbalanced across an axle | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front An item not tested |Manual| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Wheel more than one fixing missing Axle locking device missing. |5.2.1 |a| |ii|| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Brake pedal is inoperative |3.1.3c| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Throttle operating incorrectly Does not return (6.2.7 (a) (i)) | 1 |
| Fuel system component leaking From overflow pipe (6.1.3 (b) (i)) | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Shock absorber has a serious fluid leak both |5.3.2 |b|| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Rear Direction indicators not working |1.4.A.2c| | 1 |
| Front front brake binding |3.7.B.1| | 1 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
| Rear reflector missing |1.5.1a| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Brake rod insecure rear tie arm front fixing missing security device. (1.1.15 (c)) | 1 |
| Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Nearside Fuel system component leaking nearside carburettor leaking. (6.1.3 (b) (i)) | 1 |
| Rear Stop lamp not working |1.2.1b| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Offside Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Offside Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
| Centre Front position lamp|s| not working |1.1.A.3b| | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Offside Lower Fuel system component leaking |7.2.1a| | 1 |
| Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Stop lamp not working both |1.2.1b| | 1 |
| Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
| Hazard warning switch missing |1.4.B.1d| | 1 |
| Hazard warning lamps inoperative |1.4.B.1b| | 1 |
| Rear Trikes, quads or pre-68 vehicles, service brake imbalanced across an axle |3.7.B.5b| | 1 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
| Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |