MOT History from tests of petrol HONDA CT125Cs year 1984

Review the list of common HONDA CT125C failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history

Pass percent:78.72%

(The average a petrol HONDA CT125C year 1984 passes without issue)

Based on:47 MOT Tests

Most common failures	No# failures
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	2
Headlamp aim out of alignment	2
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Stop lamp not working (4.3.1 (a) (ii))	1
Front wheel spindle securing nut locking device missing \|2.3.5a\|	1
Rear Brake locking device missing \|3.2.A1e\|	1
Rear Brake reaction bracket insecure \|3.2.A1j\|	1
Front Position lamp not working (4.2.1 (a))	1
Horn not working \|1.7.3a\|	1
Direction indicators not working \|1.5.1c\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Stop lamp missing \|1.3.3a\|	1
Horn missing \|1.7.1\|	1
Headlamp not working on dipped beam (4.1.1 (a) (ii))	1
Headlamp not working on main beam (4.1.1 (a) (ii))	1
Position lamp not working (4.2.1 (a))	1
Direction indicator not working All (4.4.1 (a) (ii))	1
Front Wheel spindle locking device missing (5.2.1 (d))	1
Rear Wheel spindle locking device missing (5.2.1 (d))	1
Brake component insecure Rear brake drum tension rod and split pin missing (1.1.21 (c))	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	2
Headlamp aim out of alignment	2
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Stop lamp not working (4.3.1 (a) (ii))	1
Front wheel spindle securing nut locking device missing \|2.3.5a\|	1
Rear Brake locking device missing \|3.2.A1e\|	1
Rear Brake reaction bracket insecure \|3.2.A1j\|	1
Front Position lamp not working (4.2.1 (a))	1
Horn not working \|1.7.3a\|	1
Direction indicators not working \|1.5.1c\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Stop lamp missing \|1.3.3a\|	1
Horn missing \|1.7.1\|	1
Headlamp not working on dipped beam (4.1.1 (a) (ii))	1
Headlamp not working on main beam (4.1.1 (a) (ii))	1
Position lamp not working (4.2.1 (a))	1
Direction indicator not working All (4.4.1 (a) (ii))	1
Front Wheel spindle locking device missing (5.2.1 (d))	1
Rear Wheel spindle locking device missing (5.2.1 (d))	1
Brake component insecure Rear brake drum tension rod and split pin missing (1.1.21 (c))	1

MOT History from tests of petrol HONDA CT125Cs year 1984

Find us on Facebook