Most common failures | No# failures |
---|
Headlamp aim out of alignment | 10 |
Registration plate issues | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Wheel spoke excessively loose |4.2.1b| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Throttle operating incorrectly |6.2.1f| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Horn not working |1.7.3a| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Nearside Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Drive chain sprocket so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Registration plate lamp issues | 1 |
Direction indicator not working all |1.5.1c| | 1 |
Rear Rear reflector on motorcycle missing (1.4.1) | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Stop lamp does not emit a steady light (1.3.1b) | 1 |
Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Brake hose damaged | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Indicator switch insecure |1.5.4| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |