Most common failures | No# failures |
---|
Registration plate issues | 64 |
Rear reflector on motorcycle missing |1.4.1| | 45 |
Horn not working |1.7.3a| | 20 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Headlamp aim out of alignment | 14 |
Horn missing |1.7.1| | 13 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Rear Wheel spoke excessively loose |4.2.1b| | 9 |
Rear reflector missing (4.8.2 (a) (ii)) | 9 |
Horn not loud enough to be heard by another road user |1.7.3a| | 8 |
Rear Rear reflector on motorcycle missing |1.4.1| | 8 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 8 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Horn not working (7.7 (a) (ii)) | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Registration plate lamp issues | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Rear Stop lamp missing |1.3.3a| | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Front Direction indicator missing |1.5.1a| | 2 |
Rear Direction indicator missing |1.5.1a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
Horn is not a constant note |1.7.3c| | 2 |
Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Central Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Central Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Central Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Headlamp missing (4.1.1 (a) (ii)) | 1 |
Front shock absorber seal failed and leaking oil L/h and R/h seals leaking. |2.3.3| | 1 |
Rear Shock absorber has an excessively worn bush lower bush (5.3.2 (c)) | 1 |
Rear Headlamp reflector missing (4.1.1 (b) (ii)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Front Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Exhaust markings indicating not for road use or similar wording (6.1.2 (c)) | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Rear Upper Exhaust mounting does not fully support the exhaust system bolt loose |7.1.1.c| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front Fork yoke deformed |2.1.1b| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Throttle operating incorrectly sticking |6.2.1f| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Wheel spoke excessively loose |5.2.2 |d|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
Nearside Front Shock absorber has a serious fluid leak fork seal leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak fork seal leak (5.3.2 (b)) | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear suspension bearing has excessive free play bottom shock. |2.4.A2a|i|| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Front Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Rear Wheel spoke excessively loose 3x spokes (5.2.2 (d)) | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Stop lamp not working Not working, either brake. (4.3.1 (a) (ii)) | 1 |
Brake pedal pivot has excessive free play (1.1.1 (b)) | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) | 1 |
Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear Wheel more than one fixing missing wheel spacers missing |5.2.1 |a| |ii|| | 1 |
All position lamps not working |4.2.1 |a|| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
Rear Wheel spoke excessively loose various |4.2.1b| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Headlamp missing |1.2.3a| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Headlamp aim not tested no bulb fitted (4.1.2 (b)) | 1 |
Wheel spoke excessively loose |4.2.1b| | 1 |