| Most common failures | No# failures |
|---|
| Offside Side repeater not working (4.4.1 (a) (ii)) | 3 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 3 |
| Headlamp aim out of alignment | 3 |
| Nearside Rear Stop lamp not working |1.2.1b| | 2 |
| Windscreen wiper does not clear the windscreen effectively | 2 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
| Registration plate lamp issues | 2 |
| Nearside Rear Service brake lagging in operation (1.2.1 (d)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL AND INNER WHEEL ARCH AREA (5.3.6 (a) (i)) | 1 |
| Brakes imbalanced across an axle | 1 |
| Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 1 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Position lamp not working |4.2.1 |a|| | 1 |
| Bumper insecure |6.1.4 |a| |i|| | 1 |
| Nearside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Side repeater not working |1.4.A.2c| | 1 |
| Nearside Rear Body has a sharp edge caused by damage Lamp |6.1.C.1| | 1 |
| Headlamp has a product on the lens so that the light output is severely reduced both (4.1.4 (b)) | 1 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Front Side repeater not working |1.4.A.2c| | 1 |
| Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Offside Side repeater excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Rear Anti-roll bar linkage ball joint likely to become detached is detached (5.3.4 (a) (ii)) | 1 |
| Registration plate issues | 1 |
| Rear brake disc in such a condition that it is seriously weakened | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Offside Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Nearside Front Bumper insecure (6.1.4 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL (5.3.6 (a) (i)) | 1 |
| Undertray insecure (8.1.1 (b) (i)) | 1 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Mechanical brake component has restricted free movement | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i)) | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Central Front Macpherson strut insecurely attached lower securing bolts loose (5.3.3 (a) (i)) | 1 |
| Nearside Front Electrical wiring likely to touch hot or rotating parts ABS lead not secure (4.11 (a) (iii)) | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn front & rear bushs (5.3.4 (a) (i)) | 1 |