Most common failures | No# failures |
---|
Headlamp aim out of alignment | 23 |
Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Headlamp insecure |1.2.3b| | 6 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Registration plate issues | 5 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Brake lever mounting insecure |3.1.2a| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Rear suspension component loose |2.4.A.1a| | 2 |
Exhaust mounting missing |7.1.1c| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Suspension attachment bracket/mounting insecure Bolt fitted was too long and was not holding arm in place
Spacer added and bolt tightened (5.3.3 (a) (i)) | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Front Shock absorber has a serious fluid leak x 2 (5.3.2 (b)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Front Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Indicator switch defective |1.5.4| | 1 |
Front Brake component cracked and seriously reduced in strength |3.2.A1| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Offside Front Steering lock stop ineffective |2.1.3| | 1 |
Rear Suspension component modified so the suspension is inoperative (5.3.3 (c) (ii)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Wheel fixing missing |multiple fixings| FRONT WHEEL PINCH BOLT MISSING |5.2.1 |a| |i|| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Brake lever cannot be released smoothly |3.1.3d| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Brake lever insecure |3.1.2a| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear suspension component seized |2.4A2a|ii|| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Centre Front Upper Front position lamp damaged and function impaired |1.1.1b| | 1 |
Nearside Rear Lower Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear Lower Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Centre Front Upper Headlamp aim not tested |1.6| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Rear Brake lever attachment screws loose |3.1.2b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Steering operation restricted in free movement from lock to lock Right hand wiring loom trapping in lock stop (2.1.4 (c)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected Lock to lock right hand (6.2.7 (a) (ii)) | 1 |
Rear Brake component insecure Actuator arm bolt missing (1.1.21 (c)) | 1 |
Wheel alignment incorrect which adversely affects the steering No gap on nearside (2.4 (a)) | 1 |
Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Brake performance not tested |3.3| | 1 |
Front wheel spindle loose |2.3.5a| | 1 |
Stop lamp does not illuminate immediately a brake applies with front brake control |1.3.1a| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Fuel system component leaking fuel sender leaking |7.2.1a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |