Most common failures | No# failures |
---|
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 18 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 17 |
Headlamp aim out of alignment | 16 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 15 |
Exhaust is leaking and excessively noisey |7.1.1b| | 12 |
Steering headbearing has excessive free play |2.2.2| | 11 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 9 |
Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 7 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Registration plate issues | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
Rear Brake lever insecure |3.1.2a| | 3 |
Front Headlamp insecure |1.2.3b| | 3 |
Rear Brake lever mounting insecure |3.1.2a| | 3 |
Rear Rear wheel insecure |4.2.3b| | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Horn not working |1.7.3a| | 2 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Offside Front Direction indicator insecure |1.5.3b| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Nearside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Offside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Brake performance not tested |3.3| | 2 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Rear Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Motorcycle structure excessively damaged |6.1.1a| | 1 |
Offside Front Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
Front Brake performance not tested |3.3| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Rear Brake lever insecure |3.1.2a| | 1 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear Brake cable excessively corroded |3.2.A1b| | 1 |
Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front Brake lever is inoperative |3.1.3c| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Nearside Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Offside Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Roller brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Offside Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Stop lamp not working front brake light switch not working |4.3.1 |a| |ii|| | 1 |
Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake component leaking fluid |3.2.B4| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Brake cable damaged Cable excessively damaged at rear lower end. Cable mounting missing and insecure. (1.1.15 (a)) | 1 |
Nearside Front Brake cable badly frayed |3.2.A1b| | 1 |
Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake lever attachment screws loose |3.1.2b| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Steering lock stop maladjusted |2.1.3| | 1 |
Front Horn is not continous or uniform |1.7.3c| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake lever mounting cracked |3.1.2c| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Rear Brake lever insecure (1.1.2 (e) (i)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |