| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 11 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Horn not working |1.7.3a| | 5 |
| Drive chain excessively loose |6.2.1d| | 5 |
| Registration plate issues | 5 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Drive chain worn to excess |6.2.1e| | 4 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 3 |
| Brake pedal pivots excessively worn |3.1.3a| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Direction indicators not working |1.5.1c| | 3 |
| Front Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 2 |
| Rear Brake locking device missing |3.2.A1e| | 2 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
| Headlamp aim not tested |1.6| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Horn not working (7.7 (a)) | 2 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 2 |
| Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Offside Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Direction indicator missing |1.5.1a| | 1 |
| Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Chain guard fouling another component |6.2.1c| | 1 |
| Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Riders seat insecure |6.2.1a| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Rear Riders seat insecure |6.2.1a| | 1 |
| Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Nearside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Offside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Front Brake back plate|s| insecure |3.2.A1j| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front wheel insecure |4.2.3b| | 1 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Footrest insecure |6.2.1a| | 1 |
| Brake pedal insecure |3.1.2a| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Fuel tank insecure (6.1.3 (a) (i)) | 1 |
| Stop lamp not working front and rear (4.3.1 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Offside Rear Brake locking device missing |3.2.A1e| | 1 |
| Rear Footrest missing pillion foot pegs |6.2.1a| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Headlamp aim projected beam image obviously incorrect no beam pattern (4.1.2 (c)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Rear Footrest missing both (6.2.12 (a)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Wheel alignment incorrect which adversely affects the handling loose engine |2.5.1| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Offside Rear Brake pedal insecure |3.1.2a| | 1 |
| Nearside Front Braking system does not have an approriate system/s fitted according to its age Return Spring Missing - front brake arm |3.1.1| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |