MOT History from tests of petrol HONDA CG125s year 1999

Review the list of common HONDA CG125 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history

Pass percent:70.52%

(The average a petrol HONDA CG125 year 1999 passes without issue)

Based on:4,373 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	214
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	88
Horn not working \|1.7.3a\|	88
Rear reflector on motorcycle missing \|1.4.1\|	72
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	68
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	56
Drive chain excessively loose \|6.2.1d\|	51
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	47
Rear reflector on motorcycle obscured \|1.4.1\|	43
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	43
Horn not loud enough to be heard by another road user \|1.7.3a\|	42
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	40
Registration plate issues	39
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	35
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	35
Steering headbearing has excessive free play \|2.2.2\|	33
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	33
Direction indicators not working \|1.5.1c\|	33
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	29
Front Brake lever has inadequate reserve travel \|3.1.3b\|	26
Front suspension has inadequate damping effect. \|2.3.6c\|	26
Rear wheel bearings have excessive free play \|2.4.A.2c\|	26
Drive chain worn to excess \|6.2.1e\|	25
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	25
Direction indicators affected by the operation of another lamp \|1.5.1c\|	24
Rear Brake locking device missing \|3.2.A1e\|	24
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	23
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	23
Rear Wheel spoke excessively loose \|4.2.1b\|	23
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	22
Rear Drive chain sprocket worn to excess \|6.2.1e\|	22
Drive chain excessively tight \|6.2.1d\|	21
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	21
Front shock absorber seal failed and leaking oil \|2.3.3\|	20
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	20
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	20
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	20
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	19
Rear Rear reflector on motorcycle missing \|1.4.1\|	19
Front wheel bearings have excessive free play \|2.3.5b\|	18
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	17
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	17
Exhaust is leaking and excessively noisey \|7.1.1b\|	17
Headlamp aim beam image kick up to the offside \|1.6\|	15
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	15
Stop lamp affected by the operation of another lamp \|1.3.2\|	15
Nearside Rear Direction indicator not working \|1.5.1c\|	14
Front Stop lamp remains on when the brake is released \|1.3.1e\|	14
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	14
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	13
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	13
Rear Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	13
Headlamp switch faulty \|1.2.4\|	12
Front Front suspension has inadequate damping effect. \|2.3.6c\|	12
Front Steering headbearing has excessive free play \|2.2.2\|	12
Front Front wheel bearings have excessive free play \|2.3.5b\|	12
Brake locking device missing \|3.2.A1e\|	12
Offside Rear Direction indicator not working \|1.5.1c\|	11
Handlebar deformed \|2.1.1b\|	11
Brake lever has inadequate reserve travel \|3.1.3b\|	11
Chain guard insecure \|6.2.1c\|	11
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	11
Horn is not a constant note \|1.7.3c\|	11
Fuel cap does not fasten securely maintaining the sealing arrangement \|7.2.2b\|	11
Riders seat insecure \|6.2.1a\|	10
Front Direction indicators not working \|1.5.1c\|	10
Rear Direction indicators not working \|1.5.1c\|	10
Front Roller brake test indicates a binding brake \|3.3.A1a\|	10
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	10
Stop lamp remains on when the brake is released \|1.3.1e\|	10
Headlamp insecure \|1.2.3b\|	10
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	10
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	10
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	10
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	10
Headlamp not working on dipped beam (4.1.1 (a) (ii))	9
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	9
Direction indicators flashing less than 60 times a minute \|1.5.1c\|	9
Rear Brake reaction bracket insecure \|3.2.A1j\|	9
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	9
Throttle operating incorrectly \|6.2.1f\|	8
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	8
Front Horn not loud enough to be heard by another road user \|1.7.3a\|	8
Horn not working (7.7 (a) (ii))	8
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	8
Front Horn not working \|1.7.3a\|	8
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	8
Front Direction indicator not working \|1.5.1c\|	8
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	8
Brake pedal has inadequate reserve travel \|3.1.3b\|	7
Front Wheel spoke excessively loose \|4.2.1b\|	7
Rear Wheel spoke missing \|4.2.1b\|	7
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	7
Rear Footrest missing \|6.2.1a\|	7
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	7
Front Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	7
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	7
Nearside Front Direction indicator not working \|1.5.1c\|	6
Horn is not continous or uniform \|1.7.3c\|	6
Nearside Direction indicator not working \|1.5.1c\|	6
Direction indicator not working \|1.5.1c\|	6
Nearside Direction indicator affected by the operation of another lamp \|1.5.1c\|	6
Front Handlebar handgrip not secure to handlebars. \|2.1.1c\|	6
Rear Drive chain excessively loose \|6.2.1d\|	6
Nearside Rear Direction indicators not working \|1.5.1c\|	6
Brake pedal pivots excessively worn \|3.1.3a\|	6
Nearside Front Direction indicators not working \|1.5.1c\|	6
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	6
Front Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	6
Front Position lamp not working \|4.2.1 \|a\|\|	6
Front Direction indicator affected by the operation of another lamp \|1.5.1c\|	6
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	6
Rear Brake pedal pivots excessively worn \|3.1.3a\|	6
Brake pedal cannot be released smoothly \|3.1.3d\|	6
Rear Position lamp not working (4.2.1 (a))	6
Horn not working (7.7 (a))	6
Rear Direction indicator not working \|1.5.1c\|	6
Offside Rear Direction indicators not working \|1.5.1c\|	5
Offside Front Direction indicator not working \|1.5.1c\|	5
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	5
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	5
Offside Direction indicator affected by the operation of another lamp \|1.5.1c\|	5
Offside Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	5
Handlebar mounting clamp bolt missing \|2.1.1a\|	5
Headlamp aim not tested (4.1.2 (b))	5
All direction indicators not working (4.4.1 (a) (ii))	5
Rear Drive chain worn to excess \|6.2.1e\|	5
Headlamp not working on main beam (4.1.1 (a) (ii))	5
Stop lamp remains on when the brakes are released	5
Offside Rear Footrest missing \|6.2.1a\|	5
Horn not working \|7.7 \|a\| \|ii\|\|	5
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	5
Rear reflector missing \|4.8.2 \|a\| \|ii\|\|	5
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	5
Front Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	5
Headlamp aim not tested \|1.6\|	5
Rear Wheel has an excessively distorted bead rim. \|4.2.2\|	5
Stop lamp affected by the operation of the horn \|1.3.2\|	5
Registration plate lamp issues	5
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	5
Exhaust excessively deteriorated \|7.1.1a\|	5
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	5
Rear suspension movement is excessively stiff \|2.4.A.3b\|	5
Rear Rear reflector on motorcycle obscured \|1.4.1\|	5
Rear Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	5
Front Direction indicators affected by the operation of another lamp \|1.5.1c\|	5
Handlebar mounting clamp bolt loose \|2.1.1a\|	4
Rear suspension component loose \|2.4.A.1a\|	4
Front Brake lever cannot be released smoothly \|3.1.3d\|	4
Front wheel bearings are excessively rough \|2.3.5b\|	4
Rear Brake linkage has abnormal movement due to maladjustment \|3.2.A1i\|	4
Rear reflector on motorcycle obscured \|1.4.2b\|	4
Nearside Direction indicator flashing less than 60 times a minute \|1.5.1c\|	4
Offside Direction indicator flashing less than 60 times a minute \|1.5.1c\|	4
Nearside Rear Footrest missing \|6.2.1a\|	4
Direction indicator affected by the operation of another lamp \|1.5.1c\|	4
Rear Brake pedal cannot be released smoothly \|3.1.3d\|	4
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	4
Drive chain excessively tight (6.1.7 (k) (i))	4
Brake reaction bracket insecure \|3.2.A1j\|	4
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))	4
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	4
Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	4
All position lamps adversely affected by the operation of another lamp \|1.1.3b\|	4
Front Headlamp aim beam image kick-up is to the offside \|1.6.1\|	4
Rear Direction indicators affected by the operation of another lamp \|1.5.1c\|	4
Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	4
Nearside Rear Direction indicator damaged and function impaired \|1.5.3a\|	4
All position lamps do not illuminate immediately when switched on \|1.1.3a\|	4

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	214
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	88
Horn not working \|1.7.3a\|	88
Rear reflector on motorcycle missing \|1.4.1\|	72
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	68
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	56
Drive chain excessively loose \|6.2.1d\|	51
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	47
Rear reflector on motorcycle obscured \|1.4.1\|	43
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	43
Horn not loud enough to be heard by another road user \|1.7.3a\|	42
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	40
Registration plate issues	39
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	35
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	35
Steering headbearing has excessive free play \|2.2.2\|	33
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	33
Direction indicators not working \|1.5.1c\|	33
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	29
Front Brake lever has inadequate reserve travel \|3.1.3b\|	26
Front suspension has inadequate damping effect. \|2.3.6c\|	26
Rear wheel bearings have excessive free play \|2.4.A.2c\|	26
Drive chain worn to excess \|6.2.1e\|	25
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	25
Direction indicators affected by the operation of another lamp \|1.5.1c\|	24
Rear Brake locking device missing \|3.2.A1e\|	24
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	23
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	23
Rear Wheel spoke excessively loose \|4.2.1b\|	23
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	22
Rear Drive chain sprocket worn to excess \|6.2.1e\|	22
Drive chain excessively tight \|6.2.1d\|	21
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	21
Front shock absorber seal failed and leaking oil \|2.3.3\|	20
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	20
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	20
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	20
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	19
Rear Rear reflector on motorcycle missing \|1.4.1\|	19
Front wheel bearings have excessive free play \|2.3.5b\|	18
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	17
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	17
Exhaust is leaking and excessively noisey \|7.1.1b\|	17
Headlamp aim beam image kick up to the offside \|1.6\|	15
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	15
Stop lamp affected by the operation of another lamp \|1.3.2\|	15
Nearside Rear Direction indicator not working \|1.5.1c\|	14
Front Stop lamp remains on when the brake is released \|1.3.1e\|	14
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	14
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	13
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	13
Rear Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	13
Headlamp switch faulty \|1.2.4\|	12
Front Front suspension has inadequate damping effect. \|2.3.6c\|	12
Front Steering headbearing has excessive free play \|2.2.2\|	12
Front Front wheel bearings have excessive free play \|2.3.5b\|	12
Brake locking device missing \|3.2.A1e\|	12
Offside Rear Direction indicator not working \|1.5.1c\|	11
Handlebar deformed \|2.1.1b\|	11
Brake lever has inadequate reserve travel \|3.1.3b\|	11
Chain guard insecure \|6.2.1c\|	11
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	11
Horn is not a constant note \|1.7.3c\|	11
Fuel cap does not fasten securely maintaining the sealing arrangement \|7.2.2b\|	11
Riders seat insecure \|6.2.1a\|	10
Front Direction indicators not working \|1.5.1c\|	10
Rear Direction indicators not working \|1.5.1c\|	10
Front Roller brake test indicates a binding brake \|3.3.A1a\|	10
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	10
Stop lamp remains on when the brake is released \|1.3.1e\|	10
Headlamp insecure \|1.2.3b\|	10
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	10
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	10
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	10
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	10
Headlamp not working on dipped beam (4.1.1 (a) (ii))	9
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	9
Direction indicators flashing less than 60 times a minute \|1.5.1c\|	9
Rear Brake reaction bracket insecure \|3.2.A1j\|	9
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	9
Throttle operating incorrectly \|6.2.1f\|	8
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	8
Front Horn not loud enough to be heard by another road user \|1.7.3a\|	8
Horn not working (7.7 (a) (ii))	8
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	8
Front Horn not working \|1.7.3a\|	8
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	8
Front Direction indicator not working \|1.5.1c\|	8
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	8
Brake pedal has inadequate reserve travel \|3.1.3b\|	7
Front Wheel spoke excessively loose \|4.2.1b\|	7
Rear Wheel spoke missing \|4.2.1b\|	7
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	7
Rear Footrest missing \|6.2.1a\|	7
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	7
Front Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	7
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	7
Nearside Front Direction indicator not working \|1.5.1c\|	6
Horn is not continous or uniform \|1.7.3c\|	6
Nearside Direction indicator not working \|1.5.1c\|	6
Direction indicator not working \|1.5.1c\|	6
Nearside Direction indicator affected by the operation of another lamp \|1.5.1c\|	6
Front Handlebar handgrip not secure to handlebars. \|2.1.1c\|	6
Rear Drive chain excessively loose \|6.2.1d\|	6
Nearside Rear Direction indicators not working \|1.5.1c\|	6
Brake pedal pivots excessively worn \|3.1.3a\|	6
Nearside Front Direction indicators not working \|1.5.1c\|	6
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	6
Front Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	6
Front Position lamp not working \|4.2.1 \|a\|\|	6
Front Direction indicator affected by the operation of another lamp \|1.5.1c\|	6
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	6
Rear Brake pedal pivots excessively worn \|3.1.3a\|	6
Brake pedal cannot be released smoothly \|3.1.3d\|	6
Rear Position lamp not working (4.2.1 (a))	6
Horn not working (7.7 (a))	6
Rear Direction indicator not working \|1.5.1c\|	6
Offside Rear Direction indicators not working \|1.5.1c\|	5
Offside Front Direction indicator not working \|1.5.1c\|	5
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	5
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	5
Offside Direction indicator affected by the operation of another lamp \|1.5.1c\|	5
Offside Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	5
Handlebar mounting clamp bolt missing \|2.1.1a\|	5
Headlamp aim not tested (4.1.2 (b))	5
All direction indicators not working (4.4.1 (a) (ii))	5
Rear Drive chain worn to excess \|6.2.1e\|	5
Headlamp not working on main beam (4.1.1 (a) (ii))	5
Stop lamp remains on when the brakes are released	5
Offside Rear Footrest missing \|6.2.1a\|	5
Horn not working \|7.7 \|a\| \|ii\|\|	5
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	5
Rear reflector missing \|4.8.2 \|a\| \|ii\|\|	5
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	5
Front Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	5
Headlamp aim not tested \|1.6\|	5
Rear Wheel has an excessively distorted bead rim. \|4.2.2\|	5
Stop lamp affected by the operation of the horn \|1.3.2\|	5
Registration plate lamp issues	5
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	5
Exhaust excessively deteriorated \|7.1.1a\|	5
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	5
Rear suspension movement is excessively stiff \|2.4.A.3b\|	5
Rear Rear reflector on motorcycle obscured \|1.4.1\|	5
Rear Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	5
Front Direction indicators affected by the operation of another lamp \|1.5.1c\|	5
Handlebar mounting clamp bolt loose \|2.1.1a\|	4
Rear suspension component loose \|2.4.A.1a\|	4
Front Brake lever cannot be released smoothly \|3.1.3d\|	4
Front wheel bearings are excessively rough \|2.3.5b\|	4
Rear Brake linkage has abnormal movement due to maladjustment \|3.2.A1i\|	4
Rear reflector on motorcycle obscured \|1.4.2b\|	4
Nearside Direction indicator flashing less than 60 times a minute \|1.5.1c\|	4
Offside Direction indicator flashing less than 60 times a minute \|1.5.1c\|	4
Nearside Rear Footrest missing \|6.2.1a\|	4
Direction indicator affected by the operation of another lamp \|1.5.1c\|	4
Rear Brake pedal cannot be released smoothly \|3.1.3d\|	4
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	4
Drive chain excessively tight (6.1.7 (k) (i))	4
Brake reaction bracket insecure \|3.2.A1j\|	4
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))	4
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	4
Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	4
All position lamps adversely affected by the operation of another lamp \|1.1.3b\|	4
Front Headlamp aim beam image kick-up is to the offside \|1.6.1\|	4
Rear Direction indicators affected by the operation of another lamp \|1.5.1c\|	4
Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	4
Nearside Rear Direction indicator damaged and function impaired \|1.5.3a\|	4
All position lamps do not illuminate immediately when switched on \|1.1.3a\|	4

MOT History from tests of petrol HONDA CG125s year 1999

Find us on Facebook