>

MOT History from tests of petrol HONDA CG125s year 1995

Review the list of common HONDA CG125 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:70.81%
(The average a petrol HONDA CG125 year 1995 passes without issue)
Based on:1,199 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment51
Front position lamp does not illuminate immediately when switched on |1.1.3a|25
Rear reflector on motorcycle missing |1.4.1|23
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||20
Registration plate issues18
Drive chain excessively loose |6.2.1d|18
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|15
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|15
Nearside Front shock absorber seal failed and leaking oil |2.3.3|14
Horn not working |1.7.3a|12
Stop lamp does not illuminate immediately a brake applies |1.3.1a|11
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|9
Steering movement excessively `notchy` with the wheel raised |2.2.1b|9
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||9
Direction indicators affected by the operation of another lamp |1.5.1c|9
Offside Front shock absorber seal failed and leaking oil |2.3.3|9
Rear wheel bearings have excessive free play |2.4.A.2c|8
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|8
Wheel alignment incorrect which adversely affects the handling |2.5.1|8
Rear Rear reflector on motorcycle missing |1.4.1|7
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|7
Front shock absorber seal failed and leaking oil |2.3.3|7
Direction indicators not working |1.5.1c|7
Stop lamp remains on when the brake is released |1.3.1e|7
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|7
Drive chain worn to excess |6.2.1e|7
Rear Drive chain sprocket worn to excess |6.2.1e|6
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|6
Rear suspension bush has excessive free play |2.4.A2a|i||6
Front Direction indicator not working |1.5.1c|6
Rear Direction indicator not working |1.5.1c|6
Drive chain excessively tight |6.2.1d|6
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|6
Steering headbearing has excessive free play |2.2.2|6
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|6
Rear Stop lamp remains on when the brake is released |1.3.1e|5
Exhaust is leaking and excessively noisey |7.1.1b|5
Brake lever has inadequate reserve travel |3.1.3b|5
Rear reflector missing (4.8.2 (a) (ii))5
Front wheel bearings are excessively rough |2.3.5b|5
Stop lamp affected by the operation of another lamp |1.3.2|5
Horn not loud enough to be heard by another road user |1.7.3a|5
Direction indicators flashing less than 60 times a minute |1.5.1c|5
Headlamp dipped beam affected by the operation of another lamp |1.2.2c|5
Front Steering headbearing has excessive free play |2.2.2|5
Front Roller brake test indicates a sticking brake |3.3.A1a|5
Headlamp main beam affected by the operation of another lamp |1.2.2c|5
Rear Roller brake test indicates a sticking brake |3.3.A1a|5
Direction indicators flashing more than 120 times per minute |1.5.1c|4
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|4
Rear Brake pedal has inadequate reserve travel |3.1.3b|4
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i||4
Front Brake lever has inadequate reserve travel |3.1.3b|4
Rear position lamp adversely affected by the operation of another lamp |1.1.3b|4
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||4
Brake pedal has inadequate reserve travel |3.1.3b|4
Chain guard insecure |6.2.1c|4
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|4
Front wheel bearings have excessive free play |2.3.5b|4
Horn not working (7.7 (a) (ii))4
Direction indicator affected by the operation of another lamp |1.5.1c|4
Front Direction indicator affected by the operation of another lamp |1.5.1c|4
Rear Direction indicator affected by the operation of another lamp |1.5.1c|4
Headlamp insecure |1.2.3b|4
Front Front wheel bearings have excessive free play |2.3.5b|3
Rear Drive chain worn to excess |6.2.1e|3
Rear Rear wheel bearings have excessive free play |2.4.A.2c|3
Registration plate lamp issues3
Throttle operating incorrectly |6.2.1f|3
Front Front suspension has inadequate damping effect. |2.3.6c|3
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||3
Front Footrest insecure |6.2.1a|3
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j|3
Front Roller brake test indicates a severely grabbing brake |3.3.A1b|3
Rear Roller brake test indicates a binding brake |3.3.A1a|3
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|3
Nearside Front Direction indicator not working |1.5.1c|3
Offside Rear Direction indicator not working |1.5.1c|3
Riders seat insecure |6.2.1a|3
Drive chain excessively loose (6.1.7 (c) (i))3
Headlamp not working on main beam (4.1.1 (a) (ii))3
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c|3
Offside Front Direction indicator insecure |1.5.3b|3
Rear Drive chain sprocket carrier worn to excess |6.2.1e|3
Rear Stop lamp affected by the operation of another lamp |1.3.2|3
Headlamp aim headlamp deteriorated and function impaired |1.2.3a|3
Front Brake lever has insufficient reserve travel (1.1.2 (a))3
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|3
Wheel alignment incorrect which adversely affects the steering |2.5.1|3
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|2
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a|2
Rear Rear suspension bush has excessive free play |2.4.A2a|i||2
Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|2
Rear Brake back plate|s| insecure |3.2.A1j|2
Front Headlamp insecure (4.1.1 (c))2
Offside Front Direction indicator not working |1.5.1c|2
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|2
Centre Front wheel bearings have excessive free play |2.3.5b|2
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|2
Headlamp dipped beam affected by the operation of the horn |1.2.2c|2
Headlamp main beam affected by the operation of the horn |1.2.2c|2
Brake pedal pivots excessively worn |3.1.3a|2
Brake linkage has abnormal movement due to excessive wear |3.2.A1i|2
Drive chain sprocket carrier worn to excess |6.2.1e|2
Headlamp deteriorated and function impaired |1.2.3a|2
Front suspension has excessive stiffness in the suspension movement. |2.3.6b|2
Rear Brake reaction bracket insecure |3.2.A1j|2
Stop lamp remains on when the brakes are released2
Brake pedal insecure |3.1.2a|2
Horn is not continous or uniform |1.7.3c|2
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i||2
Drive chain fouling another component |6.2.1d|2
Headlamp aim headlamp damaged and function impaired |1.2.3a|2
Nearside Rear Footrest missing |6.2.1a|2
Offside Rear Footrest missing |6.2.1a|2
Front position lamp incorrect colour |1.1.2a|2
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b|2
Front Wheel has an excessively distorted bead rim. |4.2.2|2
Direction indicator not working |1.5.1c|2
Rear reflector on motorcycle obscured |1.4.1|2
Headlamp not working on dipped beam (4.1.1 (a) (ii))2
Nearside Front Direction indicator insecure |1.5.3b|2
Rear reflector on motorcycle obscured |1.4.2b|2
Front Brake lever cannot be applied smoothly |3.1.3d|2
Nearside Rear Direction indicator not working |1.5.1c|2
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Rear Footrest missing |6.2.1a|2
Fuel cap does not fasten securely by a positive means |7.2.2b|2
Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Rear Drive chain excessively loose |6.2.1d|2
Direction indicator flashing less than 60 times a minute |1.5.1c|2
Indicator switch defective |1.5.4|2
Rear Brake locking device insecure |3.2.A1e|2
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Brake locking device missing |3.2.A1e|2
Headlamp aim not tested |1.6|2
Clutch lever shortened so it cannot be readily operated. |6.2.1g|2
Rear Brake locking device missing |3.2.A1e|2
Rear Drive chain excessively tight |6.2.1d|2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy