MOT History from tests of petrol HONDA CG125s year 1990

Review the list of common HONDA CG125 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history

Pass percent:72.54%

(The average a petrol HONDA CG125 year 1990 passes without issue)

Based on:2,087 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	84
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	34
Horn not working \|1.7.3a\|	25
Registration plate issues	24
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	24
Drive chain excessively loose \|6.2.1d\|	23
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	23
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	21
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	20
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	20
Front Brake lever has inadequate reserve travel \|3.1.3b\|	18
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	18
Horn not loud enough to be heard by another road user \|1.7.3a\|	18
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	16
Direction indicators affected by the operation of another lamp \|1.5.1c\|	16
Steering headbearing has excessive free play \|2.2.2\|	15
Stop lamp affected by the operation of another lamp \|1.3.2\|	15
Front wheel bearings have excessive free play \|2.3.5b\|	13
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	13
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	13
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	12
Drive chain excessively tight \|6.2.1d\|	11
Drive chain worn to excess \|6.2.1e\|	11
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	10
Headlamp insecure \|1.2.3b\|	10
Throttle operating incorrectly \|6.2.1f\|	10
Rear Drive chain sprocket worn to excess \|6.2.1e\|	10
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	9
Rear reflector on motorcycle missing \|1.4.1\|	9
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	8
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	8
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	8
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	8
Offside Rear Direction indicator not working \|1.5.1c\|	8
Front suspension has inadequate damping effect. \|2.3.6c\|	8
Direction indicators not working \|1.5.1c\|	8
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	8
Exhaust is leaking and excessively noisey \|7.1.1b\|	7
Front shock absorber seal failed and leaking oil \|2.3.3\|	7
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	7
Brake lever has inadequate reserve travel \|3.1.3b\|	7
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	7
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	7
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	7
Stop lamp remains on when the brake is released \|1.3.1e\|	7
Rear Brake reaction bracket insecure \|3.2.A1j\|	7
Nearside Rear Direction indicator not working \|1.5.1c\|	6
Nearside Rear Direction indicators not working \|1.5.1c\|	6
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	6
Rear Brake pedal pivots excessively worn \|3.1.3a\|	6
Front Front wheel bearings have excessive free play \|2.3.5b\|	6
Offside Front Direction indicator not working \|1.5.1c\|	6
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	6
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	6
Direction indicator affected by the operation of another lamp \|1.5.1c\|	6
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	6
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	6
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	6
Nearside Front Direction indicator not working \|1.5.1c\|	5
Nearside Front Direction indicator insecure \|1.5.3b\|	5
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	5
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	5
Horn is not continous or uniform \|1.7.3c\|	5
Front Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	5
Handlebar deformed \|2.1.1b\|	5
Rear wheel bearings have excessive free play \|2.4.A.2c\|	5
Rear Brake reaction bracket securing bolt\|s\| missing \|3.2.A1j\|	5
Chain guard insecure \|6.2.1c\|	5
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	5
Riders seat insecure \|6.2.1a\|	5
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	5
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	4
Brake locking device missing \|3.2.A1e\|	4
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	4
Rear Brake locking device missing \|3.2.A1e\|	4
Offside Front Direction indicator insecure \|1.5.3b\|	4
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	4
Offside Front Direction indicators not working \|1.5.1c\|	4
Nearside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	4
Offside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	4
Direction indicators flashing less than 60 times a minute \|1.5.1c\|	4
Fuel system component insecure \|7.2.1b\|	4
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	4
Front mudguard insecure \|2.3.7\|	4
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	4
Rear Position lamp not working (4.2.1 (a))	4
Front Roller brake test indicates a binding brake \|3.3.A1a\|	4
Front Brake lever has insufficient reserve travel (1.1.2 (a))	4
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	4
An item not tested \|Manual\|	4
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	4
Horn not working (7.7 (a) (ii))	4
Front Stop lamp remains on when the brake is released \|1.3.1e\|	4
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	3
Offside Rear Direction indicators not working \|1.5.1c\|	3
Nearside Direction indicator not working \|1.5.1c\|	3
All position lamps adversely affected by the operation of another lamp \|1.1.3b\|	3
Horn not working (7.7 (a))	3
Front Horn not working \|1.7.3a\|	3
Offside Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	3
Brake pedal pivots excessively worn \|3.1.3a\|	3
Front Front mudguard insecure \|2.3.7\|	3
Nearside Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	3
Offside Rear Footrest missing \|6.2.1a\|	3
Brake locking device insecure \|3.2.A1e\|	3
Rear Brake reaction bracket securing bolt\|s\| loose \|3.2.A1j\|	3
All position lamps do not illuminate immediately when switched on \|1.1.3a\|	3
Rear Wheel spoke excessively loose \|4.2.1b\|	3
Headlamp aim not tested \|1.6\|	3
Rear Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	3
Nearside Rear Direction indicator insecure \|1.5.3b\|	3
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	3
Front position lamp adversely affected by the operation of another lamp \|1.1.3b\|	3
Brake pedal has inadequate reserve travel \|3.1.3b\|	3
Front Position lamp not working (4.2.1 (a))	3
Offside Rear Brake locking device missing \|3.2.A1e\|	3
Rear Direction indicator not working \|1.5.1c\|	3
Front Shock absorber has negligible damping effect (5.3.2 (b))	3
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	3
Front Direction indicators affected by the operation of another lamp \|1.5.1c\|	3
Headlamp main beam affected by the operation of another lamp \|1.2.2c\|	3
Front Direction indicators not working \|1.5.1c\|	3
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	3
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	3
Rear Brake back plate\|s\| insecure \|3.2.A1j\|	2
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	2
Headlamp not working on dipped beam (4.1.1 (a) (ii))	2
Centre Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Centre Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Front Brake excessively binding (1.2.1 (f))	2
Front Steering headbearing has excessive free play \|2.2.2\|	2
Offside Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	2
Front Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2
Nearside Rear Footrest missing \|6.2.1a\|	2
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Front Wheel spoke excessively loose \|4.2.1b\|	2
Rear Direction indicator insecure \|1.5.3b\|	2
Brake lever insecure \|3.1.2a\|	2
Rear Shock absorber has negligible damping effect (5.3.2 (b))	2
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	2
Headlamp not working on main beam (4.1.1 (a) (ii))	2
All position lamps not working (4.2.1 (a))	2
Drive chain excessively loose (6.1.7 (c) (i))	2
Front suspension assembly component loose \|2.3.1\|	2
Front Wheel bearing rough when rotated (5.1.3 (b) (i))	2
Riders seat insecure (6.2.5 (a) (ii))	2
Front Handlebar deformed \|2.1.1b\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2
Front Headlamp dipped beam affected by the operation of the horn \|1.2.2c\|	2
Nearside Rear Direction indicator damaged and function impaired \|1.5.3a\|	2
Rear Footrest missing \|6.2.1a\|	2
Exhaust excessively deteriorated \|7.1.1a\|	2
Rear Stop lamp not working (4.3.1 (a) (ii))	2
Front Floor brake test indicates a binding brake \|3.3.C2c\|	2
Rear Chain guard insecure \|6.2.1c\|	2
Front Drive chain sprocket worn to excess \|6.2.1e\|	2
Headlamp aim not tested (4.1.2 (b))	2
Rear Rear reflector missing (4.8.2 (a) (ii))	2
Rear position lamp deteriorated and function impaired \|1.1.1b\|	2
Front Footrest insecure \|6.2.1a\|	2
Rear Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	2
Rear shock absorber insecurely mounted \|2.4.A.3b\|	2
Nearside Front Direction indicators not working \|1.5.1c\|	2
Front wheel spindle loose \|2.3.5a\|	2
Front Stop lamp not working (4.3.1 (a) (ii))	2
Front Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	2
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	2
Drive chain horseshoe locking device incorrectly fitted \|6.1.7 \|j\| \|i\|\|	2
Rear reflector missing \|4.8.2 \|a\| \|ii\|\|	2
Wheel alignment incorrect which adversely affects the handling \|2.4 \|a\|\|	2
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	2
Rear Direction indicators not working \|1.5.1c\|	2
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Front Front wheel bearings are excessively rough \|2.3.5b\|	2
Nearside Rear Direction indicator incorrect colour \|1.5.1b\|	2
Front Direction indicator not working \|1.5.1c\|	2
Offside Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	2
Headlamp aim headlamp damaged and function impaired \|1.2.3a\|	2
Fuel pipe leaking \|7.2.1a\|	2
Fuel system component leaking \|7.2.1a\|	2
Rear suspension fouling which affects the movement of the rear suspension \|2.4.A.3a\|	2
Rear wheel spindle loose \|2.4.A.2b\|	2
Stop lamp adversely affected by the operation of another lamp (4.3.3 (b))	2
Brake reaction bracket insecure \|3.2.A1j\|	2
Drive chain sprocket carrier worn to excess \|6.2.1e\|	2
Direction indicator flashing more than 120 times per minute \|1.5.1c\|	2
Horn is not a constant note \|1.7.3c\|	2
Direction indicator not working \|1.5.1c\|	2
Front Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	2
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))	2
Front Front suspension has inadequate damping effect. \|2.3.6c\|	2
Rear wheel rotation likely to be impeded \|6.2.1b\|	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	84
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	34
Horn not working \|1.7.3a\|	25
Registration plate issues	24
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	24
Drive chain excessively loose \|6.2.1d\|	23
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	23
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	21
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	20
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	20
Front Brake lever has inadequate reserve travel \|3.1.3b\|	18
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	18
Horn not loud enough to be heard by another road user \|1.7.3a\|	18
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	16
Direction indicators affected by the operation of another lamp \|1.5.1c\|	16
Steering headbearing has excessive free play \|2.2.2\|	15
Stop lamp affected by the operation of another lamp \|1.3.2\|	15
Front wheel bearings have excessive free play \|2.3.5b\|	13
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	13
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	13
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	12
Drive chain excessively tight \|6.2.1d\|	11
Drive chain worn to excess \|6.2.1e\|	11
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	10
Headlamp insecure \|1.2.3b\|	10
Throttle operating incorrectly \|6.2.1f\|	10
Rear Drive chain sprocket worn to excess \|6.2.1e\|	10
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	9
Rear reflector on motorcycle missing \|1.4.1\|	9
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	8
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	8
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	8
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	8
Offside Rear Direction indicator not working \|1.5.1c\|	8
Front suspension has inadequate damping effect. \|2.3.6c\|	8
Direction indicators not working \|1.5.1c\|	8
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	8
Exhaust is leaking and excessively noisey \|7.1.1b\|	7
Front shock absorber seal failed and leaking oil \|2.3.3\|	7
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	7
Brake lever has inadequate reserve travel \|3.1.3b\|	7
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	7
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	7
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	7
Stop lamp remains on when the brake is released \|1.3.1e\|	7
Rear Brake reaction bracket insecure \|3.2.A1j\|	7
Nearside Rear Direction indicator not working \|1.5.1c\|	6
Nearside Rear Direction indicators not working \|1.5.1c\|	6
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	6
Rear Brake pedal pivots excessively worn \|3.1.3a\|	6
Front Front wheel bearings have excessive free play \|2.3.5b\|	6
Offside Front Direction indicator not working \|1.5.1c\|	6
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	6
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	6
Direction indicator affected by the operation of another lamp \|1.5.1c\|	6
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	6
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	6
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	6
Nearside Front Direction indicator not working \|1.5.1c\|	5
Nearside Front Direction indicator insecure \|1.5.3b\|	5
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	5
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	5
Horn is not continous or uniform \|1.7.3c\|	5
Front Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	5
Handlebar deformed \|2.1.1b\|	5
Rear wheel bearings have excessive free play \|2.4.A.2c\|	5
Rear Brake reaction bracket securing bolt\|s\| missing \|3.2.A1j\|	5
Chain guard insecure \|6.2.1c\|	5
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	5
Riders seat insecure \|6.2.1a\|	5
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	5
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	4
Brake locking device missing \|3.2.A1e\|	4
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	4
Rear Brake locking device missing \|3.2.A1e\|	4
Offside Front Direction indicator insecure \|1.5.3b\|	4
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	4
Offside Front Direction indicators not working \|1.5.1c\|	4
Nearside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	4
Offside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	4
Direction indicators flashing less than 60 times a minute \|1.5.1c\|	4
Fuel system component insecure \|7.2.1b\|	4
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	4
Front mudguard insecure \|2.3.7\|	4
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	4
Rear Position lamp not working (4.2.1 (a))	4
Front Roller brake test indicates a binding brake \|3.3.A1a\|	4
Front Brake lever has insufficient reserve travel (1.1.2 (a))	4
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	4
An item not tested \|Manual\|	4
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	4
Horn not working (7.7 (a) (ii))	4
Front Stop lamp remains on when the brake is released \|1.3.1e\|	4
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	3
Offside Rear Direction indicators not working \|1.5.1c\|	3
Nearside Direction indicator not working \|1.5.1c\|	3
All position lamps adversely affected by the operation of another lamp \|1.1.3b\|	3
Horn not working (7.7 (a))	3
Front Horn not working \|1.7.3a\|	3
Offside Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	3
Brake pedal pivots excessively worn \|3.1.3a\|	3
Front Front mudguard insecure \|2.3.7\|	3
Nearside Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	3
Offside Rear Footrest missing \|6.2.1a\|	3
Brake locking device insecure \|3.2.A1e\|	3
Rear Brake reaction bracket securing bolt\|s\| loose \|3.2.A1j\|	3
All position lamps do not illuminate immediately when switched on \|1.1.3a\|	3
Rear Wheel spoke excessively loose \|4.2.1b\|	3
Headlamp aim not tested \|1.6\|	3
Rear Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	3
Nearside Rear Direction indicator insecure \|1.5.3b\|	3
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	3
Front position lamp adversely affected by the operation of another lamp \|1.1.3b\|	3
Brake pedal has inadequate reserve travel \|3.1.3b\|	3
Front Position lamp not working (4.2.1 (a))	3
Offside Rear Brake locking device missing \|3.2.A1e\|	3
Rear Direction indicator not working \|1.5.1c\|	3
Front Shock absorber has negligible damping effect (5.3.2 (b))	3
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	3
Front Direction indicators affected by the operation of another lamp \|1.5.1c\|	3
Headlamp main beam affected by the operation of another lamp \|1.2.2c\|	3
Front Direction indicators not working \|1.5.1c\|	3
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	3
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	3
Rear Brake back plate\|s\| insecure \|3.2.A1j\|	2
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	2
Headlamp not working on dipped beam (4.1.1 (a) (ii))	2
Centre Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Centre Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Front Brake excessively binding (1.2.1 (f))	2
Front Steering headbearing has excessive free play \|2.2.2\|	2
Offside Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	2
Front Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2
Nearside Rear Footrest missing \|6.2.1a\|	2
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Front Wheel spoke excessively loose \|4.2.1b\|	2
Rear Direction indicator insecure \|1.5.3b\|	2
Brake lever insecure \|3.1.2a\|	2
Rear Shock absorber has negligible damping effect (5.3.2 (b))	2
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	2
Headlamp not working on main beam (4.1.1 (a) (ii))	2
All position lamps not working (4.2.1 (a))	2
Drive chain excessively loose (6.1.7 (c) (i))	2
Front suspension assembly component loose \|2.3.1\|	2
Front Wheel bearing rough when rotated (5.1.3 (b) (i))	2
Riders seat insecure (6.2.5 (a) (ii))	2
Front Handlebar deformed \|2.1.1b\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2
Front Headlamp dipped beam affected by the operation of the horn \|1.2.2c\|	2
Nearside Rear Direction indicator damaged and function impaired \|1.5.3a\|	2
Rear Footrest missing \|6.2.1a\|	2
Exhaust excessively deteriorated \|7.1.1a\|	2
Rear Stop lamp not working (4.3.1 (a) (ii))	2
Front Floor brake test indicates a binding brake \|3.3.C2c\|	2
Rear Chain guard insecure \|6.2.1c\|	2
Front Drive chain sprocket worn to excess \|6.2.1e\|	2
Headlamp aim not tested (4.1.2 (b))	2
Rear Rear reflector missing (4.8.2 (a) (ii))	2
Rear position lamp deteriorated and function impaired \|1.1.1b\|	2
Front Footrest insecure \|6.2.1a\|	2
Rear Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	2
Rear shock absorber insecurely mounted \|2.4.A.3b\|	2
Nearside Front Direction indicators not working \|1.5.1c\|	2
Front wheel spindle loose \|2.3.5a\|	2
Front Stop lamp not working (4.3.1 (a) (ii))	2
Front Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	2
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	2
Drive chain horseshoe locking device incorrectly fitted \|6.1.7 \|j\| \|i\|\|	2
Rear reflector missing \|4.8.2 \|a\| \|ii\|\|	2
Wheel alignment incorrect which adversely affects the handling \|2.4 \|a\|\|	2
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	2
Rear Direction indicators not working \|1.5.1c\|	2
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Front Front wheel bearings are excessively rough \|2.3.5b\|	2
Nearside Rear Direction indicator incorrect colour \|1.5.1b\|	2
Front Direction indicator not working \|1.5.1c\|	2
Offside Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	2
Headlamp aim headlamp damaged and function impaired \|1.2.3a\|	2
Fuel pipe leaking \|7.2.1a\|	2
Fuel system component leaking \|7.2.1a\|	2
Rear suspension fouling which affects the movement of the rear suspension \|2.4.A.3a\|	2
Rear wheel spindle loose \|2.4.A.2b\|	2
Stop lamp adversely affected by the operation of another lamp (4.3.3 (b))	2
Brake reaction bracket insecure \|3.2.A1j\|	2
Drive chain sprocket carrier worn to excess \|6.2.1e\|	2
Direction indicator flashing more than 120 times per minute \|1.5.1c\|	2
Horn is not a constant note \|1.7.3c\|	2
Direction indicator not working \|1.5.1c\|	2
Front Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	2
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))	2
Front Front suspension has inadequate damping effect. \|2.3.6c\|	2
Rear wheel rotation likely to be impeded \|6.2.1b\|	2

MOT History from tests of petrol HONDA CG125s year 1990

Find us on Facebook