Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Registration plate issues | 8 |
Horn not working |1.7.3a| | 3 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Drive chain excessively loose |6.2.1d| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp aim beam image too far to the right |1.6.4| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Rear Wheel fixing missing (single fixing) (5.2.1 (a) (ii)) | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Front Brake component is excessively corroded |3.1.5| | 1 |
Nearside Front Brake component is excessively corroded |3.1.5| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Offside Front Footrest insecure |6.2.12 |a|| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Steering lock stop loose |2.1.3| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride split link circlip |6.2.1h| | 1 |
Headlamp light source and lamp not compatible HID kit fitted |4.1.4 |c|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear suspension component misaligned |2.4.A.1a| | 1 |
Nearside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |