Most common failures | No# failures |
---|
Headlamp aim out of alignment | 203 |
Registration plate issues | 108 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 82 |
Throttle operating incorrectly |6.2.1f| | 63 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 62 |
Drive chain excessively loose |6.2.1d| | 61 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 50 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 50 |
Front wheel bearings have excessive free play |2.3.5b| | 50 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 45 |
Headlamp aim beam image kick up to the offside |1.6| | 42 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 39 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 35 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 32 |
Rear reflector on motorcycle missing |1.4.1| | 29 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 29 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 28 |
Exhaust is leaking and excessively noisey |7.1.1b| | 26 |
Front wheel bearings are excessively rough |2.3.5b| | 26 |
Front Front wheel bearings have excessive free play |2.3.5b| | 25 |
Rear Brake disc|s| cracked |3.2.A1g| | 25 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 25 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 25 |
Steering headbearing has excessive free play |2.2.2| | 21 |
Drive chain worn to excess |6.2.1e| | 20 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 18 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 18 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 17 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 17 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 17 |
Drive chain excessively tight |6.2.1d| | 16 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 16 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 15 |
Offside Front Direction indicator insecure |1.5.3b| | 14 |
Front Front wheel bearings are excessively rough |2.3.5b| | 14 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 14 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 13 |
Nearside Front Direction indicators not working |1.5.1c| | 12 |
Offside Rear Direction indicator not working |1.5.1c| | 12 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 12 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 11 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 10 |
Offside Front Direction indicator not working |1.5.1c| | 10 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 10 |
Exhaust excessively deteriorated |7.1.1a| | 9 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 9 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 9 |
Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 8 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 8 |
Horn not working |1.7.3a| | 8 |
Nearside Rear Direction indicator not working |1.5.1c| | 7 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 7 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 7 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 6 |
Drive chain excessively tight (6.1.7 (k) (i)) | 6 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 6 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 6 |
Front Valve stem seriously damaged (5.2.3 (j)) | 6 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 6 |
Front Steering headbearing has excessive free play |2.2.2| | 5 |
Front Brake excessively binding (1.2.1 (f)) | 5 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 5 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 5 |
Brake lever cannot be applied smoothly |3.1.3d| | 5 |
Nearside Front Direction indicator not working |1.5.1c| | 5 |
Front Front mudguard insecure |2.3.7| | 5 |
Nearside Rear Direction indicators not working |1.5.1c| | 5 |
Registration plate lamp issues | 5 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 5 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 5 |
Riders seat insecure |6.2.1a| | 5 |
Offside Front Direction indicators not working |1.5.1c| | 5 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 5 |