>

MOT History from tests of petrol HONDA CBR600F-Hs year 1987

Review the list of common HONDA CBR600F-H failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:73.29%
(The average a petrol HONDA CBR600F-H year 1987 passes without issue)
Based on:161 MOT Tests
Most common failuresNo# failures
Rear reflector on motorcycle missing |1.4.1|8
Headlamp aim out of alignment6
Front position lamp does not illuminate immediately when switched on |1.1.3a|3
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|3
Drive chain excessively loose |6.2.1d|2
Rear Rear reflector on motorcycle missing |1.4.1|2
Front Roller brake test indicates a binding brake |3.3.A1a|2
Nearside Front shock absorber seal failed and leaking oil |2.3.3|2
Exhaust is leaking and excessively noisey |7.1.1b|2
Centre Front Roller brake test indicates a binding brake |3.3.A1a|2
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Offside Front shock absorber seal failed and leaking oil |2.3.3|1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)1
Nearside Rear Direction indicators affected by the operation of another lamp (1.5.1c)1
Offside Rear Direction indicators affected by the operation of another lamp (1.5.1c)1
Steering headbearing has excessive free play |2.2.2|1
Front Floor brake test indicates a sticking brake |3.3.C2c|1
Front wheel bearings are excessively rough |2.3.5b|1
Front Front wheel bearings have excessive free play |2.3.5b|1
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Centre Exhaust mounting missing |7.1.1c|1
Rear Stop lamp not working |4.3.1 |a| |ii||1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Stop lamp remains on when the brake is released |1.3.1e|1
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Offside Front Steering lock stop ineffective |2.1.3|1
Nearside Front Direction indicator insecure |1.5.3b|1
Rear Brake disc|s| excessively worn |3.2.A1l|1
Stop lamp not working |4.3.1 |a| |ii||1
Offside Rear Footrest insecure |6.2.1a|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Front Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Rear suspension component loose |2.4.A.1a|1
Registration plate lamp issues1
Drive chain excessively loose |6.1.7 |c| |i||1
Rear Brake disc fractured |1.1.14 |a| |ii||1
Rear Brake disc significantly and obviously worn |1.1.14 |a| |i||1
Stop lamp does not illuminate immediately a brake applies front control |1.3.1a|1
Rear Brake reaction bracket insecure |3.2.A1j|1
Nearside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|1
Rear Roller brake test indicates a severely juddering brake |3.3.A1b|1
Rear Brake disc|s| excessively scored |3.2.A1l|1
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i||1
Nearside Front Direction indicator not working |1.5.1c|1
Rear Brake disc|s| excessively pitted |3.2.A1l|1
Offside Front Brake pipe inadequately supported |3.2.B2b|1
Offside Front Roller brake test indicates a binding brake |3.3.A1a|1
Nearside Front Roller brake test indicates a binding brake |3.3.A1a|1
Offside Rear Roller brake test indicates a binding brake |3.3.A1a|1
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Front Exhaust is leaking and excessively noisey |7.1.1b|1
Centre Rear Roller brake test indicates a binding brake |3.3.A1a|1
Centre Rear Drive chain excessively tight |6.2.1d|1
Offside Rear Direction indicators not working |1.5.1c|1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Floor brake test indicates a binding brake |3.3.C2c|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy