>

MOT History from tests of petrol HONDA CBR600s year 1991

Review the list of common HONDA CBR600 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:74.71%
(The average a petrol HONDA CBR600 year 1991 passes without issue)
Based on:601 MOT Tests
Most common failuresNo# failures
Front Roller brake test indicates a binding brake |3.3.A1a|14
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|13
Headlamp aim out of alignment13
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|8
Front Floor brake test indicates a binding brake |3.3.C2c|7
Front wheel bearings have excessive free play |2.3.5b|7
Registration plate issues6
Front position lamp does not illuminate immediately when switched on |1.1.3a|6
Headlamp aim beam image kick up to the offside |1.6|6
Nearside Front shock absorber seal failed and leaking oil |2.3.3|5
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|5
Drive chain excessively loose |6.2.1d|5
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|5
Offside Front shock absorber seal failed and leaking oil |2.3.3|4
Exhaust markings indicating not for road use or similar wording |7.1.4|4
Rear wheel bearings have excessive free play |2.4.A.2c|4
Front Floor brake test indicates a sticking brake |3.3.C2c|3
Front Front wheel bearings are excessively rough |2.3.5b|3
Rear Footrest missing |6.2.1a|3
Steering movement excessively `notchy` with the wheel raised |2.2.1b|3
Rear reflector on motorcycle missing |1.4.1|3
Wheel alignment incorrect which adversely affects the steering |2.5.1|3
Steering headbearing has excessive free play |2.2.2|3
Exhaust is leaking and excessively noisey |7.1.1b|3
Drive chain worn to excess |6.2.1e|3
Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Front wheel bearings are excessively rough |2.3.5b|3
Rear Position lamp not working (4.2.1 (a))2
Front shock absorber seal failed and leaking oil |2.3.3|2
Riders seat insecure |6.2.1a|2
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Front Brake excessively binding (1.2.1 (f))2
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Drive chain excessively loose (6.1.7 (c) (i))2
An item not tested |Manual|2
Steering movement excessively stiff with the wheel raised |2.2.1b|2
Exhaust mounting does not fully support the exhaust system |7.1.1.c|2
Wheel alignment incorrect which adversely affects the handling |2.5.1|2
Nearside Rear Direction indicator incorrect colour |1.5.1b|2
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b||2
Throttle operating incorrectly |6.2.1f|2
Registration plate lamp issues1
Fuel hose leaking |7.2.1a|1
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii||1
Front Brake lever attachment screws loose |3.1.2b|1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride top fork yolk clamp broken |6.2.1h|1
Nearside Rear Direction indicator not working |4.4.1 |a| |ii||1
Handlebar restricted in free movement from lock to lock caused by cables/loom (2.1.4 (c))1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Front Throttle operating incorrectly revs staying up on full lock |6.2.1f|1
Rear Chain guard insecure at rear |6.2.1c|1
Rear Rear wheel bearings are excessively rough |2.4.A.2c|1
Front Front suspension has inadequate damping effect. |2.3.6c|1
Front Decelerometer brake test indicates a binding brake |3.3.E1d|1
Nearside Rear Footrest insecure |6.2.1a|1
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c|1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Offside Exhaust markings indicating not for road use or similar wording |7.1.4|1
Nearside Drive chain excessively tight |6.2.1d|1
Front Motorcycle structure cracked |6.1.1a|1
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Nearside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Offside Front Direction indicator insecure |1.5.3b|1
Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))1
Stop lamp remains on when the brakes are released1
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c|1
Front Plate brake test indicates a binding brake |3.3.B1a|1
Rear Plate brake test indicates a sticking brake |3.3.B1a|1
Front Wheel has an excessively distorted bead rim. |4.2.2|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Rear Rear mono-shock pivot excessively worn |2.4.B.4|1
Throttle operating incorrectly staying open. |6.2.1f|1
Offside Handlebar deformed |2.1.1b|1
Drive chain excessively tight |6.2.1d|1
Roller brake test indicates a binding brake |3.3.A1a|1
Steering movement excessively rough with the wheel raised |2.2.1b|1
Nearside Rear Direction indicators not working |1.5.1c|1
Offside Rear Direction indicators not working |1.5.1c|1
Front Brake disc|s| cracked |3.2.A1g|1
Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Front Decelerometer brake test indicates a sticking brake |3.3.E1d|1
Offside Front Brake disc|s| cracked |3.2.A1g|1
Rear Brake disc|s| cracked |3.2.A1g|1
Rear Brake disc fractured |1.1.14 |a| |ii||1
All direction indicators not working |4.4.1 |a| |ii||1
Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j|1
Rear Drive chain sprocket worn to excess |6.2.1e|1
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Horn not working |7.7 |a| |ii||1
Offside Rear Direction indicator incorrect colour |1.5.1b|1
Front Stop lamp not working (4.3.1 (a) (ii))1
Rear Stop lamp not working (4.3.1 (a) (ii))1
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i||1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|1
Offside Front Direction indicator not working |1.5.1c|1
Front Wheel excessively distorted (5.2.2 (c) (i))1
Rear Brake disc|s| excessively worn |3.2.A1l|1
Rear Brake pedal insecure |3.1.2a|1
Offside Front Brake disc contaminated (1.1.14 (b))1
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|1
Offside Direction indicator flashing more than 120 times per minute |1.5.1c|1
Nearside Steering lock stop ineffective |2.1.3|1
Front Stop lamp not working |4.3.1 |a| |ii||1
Offside Front Indicator tell tale not functioning |1.5.2|1
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Offside Front Upper Motorcycle structure excessively damaged |6.1.1a|1
Front Exhaust has a major leak of exhaust gases at cylinder head (6.1.2 (a))1
Front Direction indicator missing |1.5.1a|1
Front Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Direction indicator insecure |1.5.3b|1
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Horn not working |1.7.3a|1
Nearside Front Brake disc fractured |1.1.14 |a| |ii||1
Offside Front Brake disc fractured |1.1.14 |a| |ii||1
Brake lever has insufficient reserve travel |1.1.2 |a||1
Rear Floor brake test indicates a binding brake |3.3.C2c|1
Offside Rear Direction indicator not working (4.4.1 (a) (ii))1
Front Front wheel bearings have excessive free play |2.3.5b|1
Offside Exhaust is leaking and excessively noisey |7.1.1b|1
Rear wheel insecure |4.2.3b|1
Offside Front Floor brake test indicates a sticking brake |3.3.C2c|1
Front Exhaust is leaking and excessively noisey |7.1.1b|1
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Nearside Front Brake caliper|s| securing bolt|s| missing |3.2.A1j|1
Clutch lever positioned so it cannot be readily operated. |6.2.1g|1
Offside Front Brake disc|s| has excessive run out |3.2.A1m|1
Rear wheel bearings are excessively rough |2.4.A.2c|1
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Nearside Front Front wheel bearings have excessive free play |2.3.5b|1
Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b||1
Rear Drive chain excessively loose |6.2.1d|1
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy