>

MOT History from tests of petrol HONDA CBR400RRs year 1991

Review the list of common HONDA CBR400RR failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:79.06%
(The average a petrol HONDA CBR400RR year 1991 passes without issue)
Based on:363 MOT Tests
Most common failuresNo# failures
Rear reflector on motorcycle missing |1.4.1|10
Headlamp aim out of alignment7
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|5
Rear Rear reflector on motorcycle missing |1.4.1|5
Registration plate issues3
Front wheel bearings have excessive free play |2.3.5b|3
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|3
Nearside Front shock absorber seal failed and leaking oil |2.3.3|3
Rear wheel bearings have excessive free play |2.4.A.2c|3
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|2
Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Rear reflector missing |4.8.2 |a| |ii||2
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Offside Front Brake disc|s| has excessive run out |3.2.A1m|2
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Drive chain excessively tight |6.2.1d|1
Front Front mudguard insecure |2.3.7|1
Offside Rear Brake pedal attachment screws loose |3.1.2b|1
Handlebar handgrip not secure to handlebars. |2.1.1c|1
Indicator switch defective |1.5.4|1
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c|1
Drive chain excessively loose |6.2.1d|1
Rear Brake linkage clevis joint excessively worn |3.2.A1d|1
Brake locking device insecure |3.2.A1e|1
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))1
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Rear Stop lamp remains on when the brake is released Front brake light switch sticking on |1.3.1e|1
Rear Valve stem seriously damaged (5.2.3 (j))1
All direction indicators not working (4.4.1 (a) (ii))1
Rear position lamp adversely affected by the operation of another lamp both |1.1.3b|1
Rear Stop lamp does not illuminate immediately a brake applies foot brake |1.3.1a|1
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Rear Footrest missing both |6.2.1a|1
Front Floor brake test indicates a binding brake |3.3.C2c|1
Throttle operating incorrectly |6.2.1f|1
Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Nearside Front Direction indicator incorrect colour |1.5.1b|1
Offside Front Direction indicator incorrect colour |1.5.1b|1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Footrest missing |6.2.1a|1
Front Stop lamp not working (4.3.1 (a) (ii))1
Front Brake lever has inadequate reserve travel |3.1.3b|1
Rear Brake locking device insecure |3.2.A1e|1
Offside Front Footrest insecure |6.2.1a|1
Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c|1
Front Brake disc|s| has excessive run out |3.2.A1m|1
Front Indicator switch defective |1.5.4|1
Nearside Footrest insecure |6.2.1a|1
Front Front wheel bearings have excessive free play |2.3.5b|1
Front Plate brake test indicates a binding brake |3.3.B1a|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Horn not working |1.7.3a|1
Front Steering headbearing has excessive free play |2.2.2|1
Offside Front Brake linkage has abnormal movement due to excessive wear |3.2.A1i|1
Front Throttle operating incorrectly |6.2.1f|1
Nearside Rear Footrest missing |6.2.1a|1
Offside Rear Footrest missing |6.2.1a|1
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1|1
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Offside Rear Direction indicator not working |1.5.1c|1
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Rear reflector missing (4.8.2 (a) (ii))1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Nearside Front Direction indicators not working |1.5.1c|1
Offside Rear Direction indicators not working |1.5.1c|1
Exhaust is leaking and excessively noisey |7.1.1b|1
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Rear Brake pedal cannot be applied smoothly |3.1.3d|1
Front Brake lever cannot be applied smoothly |3.1.3d|1
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|1
Front Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Rear Brake reaction bracket insecure |3.2.A1j|1
Stop lamp remains on when the brakes are released1
Front Exhaust has a major leak of exhaust gases head /manifold |6.1.2 |a||1
Rear Exhaust has a major leak of exhaust gases silencer |6.1.2 |a||1
Front Wheel alignment incorrect which adversely affects the handling |2.4 |a||1
Drive chain excessively tight |6.1.7 |k| |i||1
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e||1
Nearside Rear Footrest missing |6.2.12 |a||1
Offside Rear Footrest missing |6.2.12 |a||1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Front shock absorber seal failed and leaking oil |2.3.3|1
Front Brake lever attachment screws missing |3.1.2b|1
Front Fairings insecure and likely to impede the steering |2.1.2e|1
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j|1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Stop lamp not working rear pedal |4.3.1 |a| |ii||1
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Steering movement excessively rough with the wheel raised |2.2.1b|1
Nearside Direction indicators not working |1.5.1c|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy