Most common failures | No# failures |
---|
Headlamp aim out of alignment | 34 |
Rear reflector on motorcycle missing |1.4.1| | 32 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 15 |
Registration plate issues | 15 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Front wheel bearings have excessive free play |2.3.5b| | 11 |
Offside Rear Footrest missing |6.2.1a| | 9 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Nearside Rear Footrest missing |6.2.1a| | 8 |
Throttle operating incorrectly |6.2.1f| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear Rear reflector on motorcycle missing |1.4.1| | 6 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
Offside Front Footrest insecure |6.2.1a| | 6 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Drive chain excessively tight |6.2.1d| | 3 |
Headlamp switch faulty |1.2.4| | 3 |
Rear Drive chain worn to excess |6.2.1e| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
Seat insecure |6.2.1a| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Offside Footrest insecure |6.2.1a| | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Rear Brake disc|s| cracked |3.2.A1g| | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Offside Front Motorcycle structure excessively distorted |6.1.1a| | 2 |
Front mudguard insecure |2.3.7| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Indicator tell tale not functioning |1.5.2| | 1 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Brake lever is bent and the brake cannot be readily applied (1.1.2 (d)) | 1 |
Centre Front Exhaust excessively deteriorated |7.1.1a| | 1 |
Offside Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Nearside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Brake component leaking fluid |3.2.B4| | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Nearside Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Front Brake performance not tested |3.3| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Central Front Upper Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Brake lever attachment screws loose |3.1.2b| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Nearside Front Upper Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front Upper Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Lower Front wheel bearings are excessively rough |2.3.5b| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Brake hose excessively twisted Font brake master cylinder hose (1.1.12 (b) (ii)) | 1 |
Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Brake lever insecure (1.1.2 (e) (i)) | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Horn not working |1.7.3a| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Brake back plate|s| securing bolt|s| missing |3.2.A1j| | 1 |
Offside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
All position lamps not working |4.2.1 |a|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Centre Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front suspension assembly component missing |2.3.1| | 1 |
Nearside Front Motorcycle structure excessively distorted |6.1.1a| | 1 |
Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Centre Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Upper Throttle operating incorrectly |6.2.1f| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Brake component is excessively corroded pad lining coming off backplate |3.1.5| | 1 |
Nearside Rear Motorcycle structure excessively corroded footrest seized and cannot be deployed |6.1.1a| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Front Headlamp switch faulty |1.2.4| | 1 |
Front Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Fuel cap sealing washer torn |7.2.2c| | 1 |
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Nearside Inner Front Lower Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Offside Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Footrest missing Both Sides |6.2.1a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Front Horn missing |1.7.1| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Nearside Front Upper Horn not working |1.7.3a| | 1 |
Nearside Front Upper Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Offside Front Position lamp not working (4.2.1 (a)) | 1 |
Nearside Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Drive chain horseshoe locking device likely to become detached Device missing (6.1.7 (j) (ii)) | 1 |