>

MOT History from tests of petrol HONDA CBR125Rs year 2008

Review the list of common HONDA CBR125R failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:72.01%
(The average a petrol HONDA CBR125R year 2008 passes without issue)
Based on:2,451 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment123
Drive chain excessively loose |6.2.1d|98
Front Roller brake test indicates a binding brake |3.3.A1a|34
Drive chain worn to excess |6.2.1e|28
Rear Roller brake test indicates a binding brake |3.3.A1a|26
Steering movement excessively `notchy` with the wheel raised |2.2.1b|25
Registration plate lamp issues21
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|21
Nearside Front shock absorber seal failed and leaking oil |2.3.3|19
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|18
Registration plate issues18
Drive chain excessively loose (6.1.7 (c) (i))17
Rear wheel bearings have excessive free play |2.4.A.2c|16
Exhaust is leaking and excessively noisey |7.1.1b|16
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|16
Drive chain excessively tight |6.2.1d|14
Rear Drive chain sprocket worn to excess |6.2.1e|13
Stop lamp does not illuminate immediately a brake applies |1.3.1a|13
Front position lamp does not illuminate immediately when switched on |1.1.3a|13
Offside Front shock absorber seal failed and leaking oil |2.3.3|12
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|12
Riders seat insecure |6.2.1a|11
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|11
Rear Brake excessively binding (1.2.1 (f))10
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||10
Front Brake excessively binding (1.2.1 (f))9
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|8
Drive chain so loose it is likely to fail (6.1.7 (c) (ii))7
Wheel alignment incorrect which adversely affects the handling |2.5.1|7
Headlamp insecure |1.2.3b|7
Front shock absorber seal failed and leaking oil |2.3.3|7
Throttle operating incorrectly |6.2.1f|6
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|6
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|6
Drive chain worn to excess (6.1.7 (c) (i))6
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))6
Front Stop lamp not working (4.3.1 (a) (ii))6
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||6
Handlebar deformed |2.1.1b|6
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|6
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|5
Exhaust excessively deteriorated |7.1.1a|5
Front Wheel has an excessively distorted bead rim. |4.2.2|5
Front Brake lever cannot be applied smoothly |3.1.3d|5
Nearside Front Direction indicator insecure |1.5.3b|5
Front Shock absorber has negligible damping effect (5.3.2 (b))5
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))5
Steering headbearing has excessive free play |2.2.2|5
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|5
Offside Front Direction indicator not working |1.5.1c|5
Front Floor brake test indicates a binding brake |3.3.C2c|5
Front Drive chain sprocket worn to excess |6.2.1e|5
Rear reflector on motorcycle missing |1.4.1|5
Drive chain excessively loose |6.1.7 |c| |i||5
Front Position lamp not working (4.2.1 (a))5
Front Brake excessively binding |1.2.1 |f||5
Horn not working |1.7.3a|5
Wheel alignment incorrect which adversely affects the steering |2.5.1|5
Rear Floor brake test indicates a binding brake |3.3.C2c|5
Front Exhaust is leaking and excessively noisey |7.1.1b|4
Steering movement excessively stiff with the wheel raised |2.2.1b|4
Nearside Front Direction indicator not working (4.4.1 (a) (ii))4
Headlamp aim not tested (4.1.2 (b))4
Nearside Rear Footrest missing (6.2.12 (a))4
Offside Rear Footrest missing (6.2.12 (a))4
Offside Front Handlebar deformed |2.1.1b|4
Brake lever cannot be applied smoothly |3.1.3d|4
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|4
Offside Front Direction indicator insecure |1.5.3b|4
Rear Stop lamp not working (4.3.1 (a) (ii))4
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))4
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|4
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|4
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Rear Rear wheel bearings have excessive free play |2.4.A.2c|3
Nearside Handlebar deformed |2.1.1b|3
Offside Rear Direction indicator not working (4.4.1 (a) (ii))3
Headlamp not working on dipped beam (4.1.1 (a) (ii))3
Offside Front Direction indicator incorrect colour |1.5.1b|3
Offside Front Direction indicator missing |1.5.1a|3
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||3
Front position lamp incorrect colour |1.1.2a|3
Rear Brake excessively binding |1.2.1 |f||3
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))3
Stop lamp remains on when the brakes are released3
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|3
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))3
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))3
Front Front suspension has inadequate damping effect. |2.3.6c|3
Headlamp insecure (4.1.1 (c))3
Drive chain excessively tight (6.1.7 (k) (i))3
Nearside Front Direction indicator incorrect colour |1.5.1b|3
Riders seat insecure (6.2.5 (a) (ii))3
Drive chain so worn it is likely to fail (6.1.7 (c) (ii))3
Exhaust system insecure (6.1.2 (a))3
Drive chain sprocket carrier worn to excess |6.2.1e|3
Headlamp not working on dipped beam |4.1.1 |a| |ii||3
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))3
Front Valve stem seriously damaged (5.2.3 (j))3
Rear Brake disc|s| excessively worn |3.2.A1l|3
Indicator tell tale not functioning |1.5.2|3
Direction indicator not working |1.5.1c|3
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|3
Offside Front Direction indicators not working |1.5.1c|3

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy