Most common failures | No# failures |
---|
Drive chain excessively loose |6.2.1d| | 35 |
Headlamp aim out of alignment | 32 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 23 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 21 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 18 |
Registration plate issues | 17 |
Drive chain worn to excess |6.2.1e| | 16 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 14 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 12 |
Horn not working |1.7.3a| | 11 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 7 |
Drive chain excessively tight |6.2.1d| | 6 |
Offside Handlebar deformed |2.1.1b| | 6 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 6 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
Headlamp insecure |1.2.3b| | 6 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Front Brake excessively binding (1.2.1 (f)) | 4 |
Offside Front Direction indicators not working |1.5.1c| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 4 |
Offside Front Direction indicator insecure |1.5.3b| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear reflector missing (4.8.2 (a) (ii)) | 4 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
Riders seat insecure |6.2.1a| | 3 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Drive chain excessively loose (6.1.7 (c) (i)) | 3 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 3 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 3 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Riders seat insecure (6.2.5 (a) (ii)) | 3 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Headlamp switch faulty |1.2.4| | 2 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Nearside Front Direction indicator insecure |1.5.3b| | 2 |
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Drive chain excessively loose |6.2.1d| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Riders seat insecure |6.2.5 |a| |ii|| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Direction indicator not working |1.5.1c| | 2 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
Headlamp aim not tested |4.1.2 |b|| | 2 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Nearside Handlebar deformed |2.1.1b| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Exhaust has part of the system missing |7.1.1a| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Headlamp not working on dipped beam L/H (4.1.1 (a) (ii)) | 1 |
Headlamp aim not tested R/H (4.1.2 (b)) | 1 |
Headlamp not working on dipped beam R/H (4.1.1 (a) (ii)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Nearside Front Direction indicator incorrect colour lense missing. showing white light |4.4.3 |a|| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Nearside Rear position lamp insecure |1.1.1c| | 1 |
Front Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
Front Front position lamp damaged and function impaired |1.1.1b| | 1 |
Rear Upper Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Front Lower Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Rear Lower Footrest missing |6.2.1a| | 1 |
Offside Rear Lower Footrest missing |6.2.1a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Footrest missing |6.2.1a| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Footrest missing both rear |6.2.12 |a|| | 1 |
Nearside Front Footrest insecure |6.2.12 |a|| | 1 |
Front Brake hose excessively damaged |1.1.12 |b| |ii|| | 1 |
Rear Brake disc insecure bolt loose |1.1.14 |a| |ii|| | 1 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Brake lagging in operation |1.2.1 |d|| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride clip fitted the wrong way |6.2.1h| | 1 |
Offside Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Front Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Front Direction indicator missing (4.4.1 (a) (ii)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Front Direction indicator adversely affected by the operation of another lamp when operated illuminates the headlight (4.4.3 (b)) | 1 |
Fuel hose leaking (6.1.3 (b) (i)) | 1 |
Steering operation restricted in free movement from lock to lock ignition loose / fouling steering lock (2.1.4 (c)) | 1 |
Front Brake caliper inadequately mounted and braking performance affected incorrect caliper / only touching outer rim of disc (1.1.16 (c) (ii)) | 1 |
Front Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
Clutch lever positioned so it cannot be readily operated comes out of holder when released (6.2.7 (b)) | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Offside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Front Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
Rear Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
Front Headlamp aim not tested (4.1.2 (b)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Fuel system component leaking leaking from carb (6.1.3 (b) (i)) | 1 |
Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
Front Valve stem seriously damaged valve stem missing (5.2.3 (j)) | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Offside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
All direction indicators adversely affected by the operation of another lamp All working indicators (4.4.3 (b)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected When steering right vehicle revs over 6k (6.2.7 (a) (ii)) | 1 |
Front Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Braking system does not have an approriate system/s fitted according to its age |3.1.1| | 1 |
Front Gradient brake test indicates a sticking brake |3.3.D1c| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Front Handlebar deformed |2.1.1b| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride clutch lever |6.2.1h| | 1 |
Front suspension assembly component excessively bent |2.3.1| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Offside Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Front Outer Horn not working |1.7.3a| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain split link has clip wrong way round |6.2.1h| | 1 |
Nearside Handlebar deformed can trap thumb against tank |2.1.1b| | 1 |
Offside Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Registration plate lamp issues | 1 |
Headlamp damaged and function impaired |1.2.3a| | 1 |
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Direction indicator insecure |1.5.3b| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Wheel more than one fixing loose (5.2.1 (a) (ii)) | 1 |
Front Headlamp insecure (4.1.1 (c)) | 1 |
Rear Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Front Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
Rear Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
Front Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Steering headbearing has excessive wear or free play free play |2.2.2 |f| |i|| | 1 |
Fuel cap ineffective |6.1.3 |b| |i|| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Rear Suspension arm pin or bush excessively worn swing arm bushes (5.3.4 (a) (i)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Centre Front Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Front Upper Direction indicator insecure |1.5.3b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
An item not tested |Manual| | 1 |
Nearside Front Steering lock stop maladjusted |2.1.3| | 1 |
Steering operation restricted in free movement from lock to lock clutch cable (2.1.4 (c)) | 1 |
All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Clutch lever positioned so it cannot be readily operated |6.2.7 |b|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |