Most common failures | No# failures |
---|
Headlamp aim out of alignment | 61 |
Registration plate issues | 43 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 24 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 22 |
Rear reflector on motorcycle missing |1.4.1| | 19 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Exhaust is leaking and excessively noisey |7.1.1b| | 12 |
Throttle operating incorrectly |6.2.1f| | 11 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Horn not working |1.7.3a| | 10 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 10 |
Front wheel bearings have excessive free play |2.3.5b| | 10 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 10 |
Drive chain excessively loose |6.2.1d| | 10 |
Front wheel bearings are excessively rough |2.3.5b| | 9 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 7 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Drive chain excessively tight |6.2.1d| | 7 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 7 |
Front Front wheel bearings have excessive free play |2.3.5b| | 7 |
Drive chain worn to excess |6.2.1e| | 6 |
Rear Brake disc|s| cracked |3.2.A1g| | 6 |
Headlamp aim beam image kick up to the offside |1.6| | 6 |
Riders seat insecure |6.2.1a| | 6 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 5 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 5 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Exhaust excessively deteriorated |7.1.1a| | 5 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 4 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 4 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Offside Front Direction indicator not working |1.5.1c| | 4 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Stop lamp not working |4.3.1 |a| |ii|| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Horn not working |1.7.3a| | 3 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Nearside Front Footrest insecure |6.2.1a| | 3 |
Front Front wheel bearings are excessively rough |2.3.5b| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Footrest missing |6.2.1a| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Rear reflector missing |4.8.2 |a| |ii|| | 3 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Headlamp switch faulty |1.2.4| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Rear Rear reflector on motorcycle obscured |1.4.1| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 2 |
Offside Front Brake pipe inadequately supported |3.2.B2b| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front Brake disc|s| cracked |3.2.A1g| | 2 |
Brake performance not tested |3.3| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 2 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Offside Headlamp incorrect colour |1.2.1| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Front Brake excessively binding |1.2.1 |f|| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Offside Steering lock stop ineffective |2.1.3| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 2 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Rear Brake disc fractured |1.1.14 |a| |ii|| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |